FME Flow

We have two FME Server environments als on two different computer environments. I copied the content of the .fsproject file from one computer environment into the other computer environment by means of copy/paste into a text file and then changing the extention to .fsproject (it's a bit of hack). No idea by doing that  the .fsproject will be altered.  However, I am then trying to import the project(.fsproject file) into the 2nd FME Server environment via "Projects" < "Manage projects" <"import". I am dragging the .fsproject file into and then clicking on "Import". After running,  I get the following error: I changed our domains name to "nameofname" for security reasons.COM.safe.fmeserver.configuration.migration.FMEConfigurationException: java.io.IOException: Error on ZipFile \\nameofdomain\aplroot$\APLDATA\FMESERVER\resources\system\temp\tomcat\22e287e6b3514dc9b4dd095174c01fb7\restServerRestore.fsconfigPROJECT IMPORT : FAILURETask Failed : Please refer to above message I tried us

We have a job running as a stream, it is not using any specific stream transformers, but it calls an API endpoint and just runs over and over (~10s) as fast as it can poll the API and write the data. The problem is the engine does not release memory between runs, so it slowly grows and grows. And if left for weeks unchecked the server starts having low memory issues. We can stop and start the stream and it will release the memory back.  There is the server config setting MAX_TRANSACTION_RESULT_SUCCESSES which we have set to the default 100, but this does not seem to restart the engine and release the memory. Not sure if a stream just counts as 1 success so it never gets to 100 or what. So, wanted to reach out for any possible solutions for this? Only idea we have is to make and schedule a job that can call the v4 API to stop and start the stream every night. Any better ideas? Maybe some configuration we are missing? Thanks a lot!  

I have points and lines, I want to snap the lines to the points, both edges, ends, and sides. I tried using the snapper and also tried using the anchored snapper, but I still don't get to snap some. I have used intersection transformer, it does the major part of the snapping but creates new points at any intersection without a point. I really would love to do this snapping based on relationship (attribute)

What I've done so far ... I've selected a .fgb from a location (the location will stay the same, however, there will be multiple .gdbs that come and go over time) I added a reader, Schema (Any Format), filtered for *.gdb.I added a FeatureReader, with a WHERE clause to only look for ... @Value(fme_feature_type_name) LIKE '%M_CSCL%' ...However, the way I've set up the FeatureReader doesn't work in it's current state.Any hints/improvements/better ways to achieve this would be appreciated, see the attached workspace.thanksJeremy   

For FME Server what are the practical differences between internal and remote Version Control? What considerations should we to take into account about when choosing between them?

Hello,I would like to ask about Rest API v3 support. For how long will it be supported yet, before it will be needed to switch to v4?  

Hi there, I am trying to use FME to automate some user management for FME Server. Specifically I would like to schedule a workspace to remove any Azure users that are not members of a role. I have worked out how to list the users and get their roles, but I can't work out how to go from this json array: ["user:admin","fmeadmin","fmesuperuser"] to the integer value 2. Can anyone please help me drop the "user:..." part from the array and count the number of items that are left over? Thanks!Marc

Hi, is there an alternate solution available from safe to replace the basic authentication for IMAP and SMTP? Since Microsoft will stop supporting this solution soon

Hello everyone,  I published a workspace with a Shapefile Reader to FME Server . When I choose 'Run Workspace' to run it, and solely upload the .shp file, it runs correctly.  For my colleagues, I made a Workspace App to run it. However, when running it through the app, I get the "Shapefile Reader: The .dbf for (...) could not be found." warning in the logfile. Naturally, there is no correct output subsequently. Can someone explain to me what I am doing wrong or how it is technically possible that the exact same workspace with the exact same parameters runs differently for both interfaces? Note: I used a File/URL parameter for the Writer and specified the extension filters in the file/URL configuration to be .shp and .shz. Thanks in advance,  Fleur

Hi everybody, On FME Server, by means of Notifications (classic), I am trying to configure the Subscription "JobSubmitter_Email_JobSuccess" so that, when ANY workspace is run sucessfully on FME Server, I receive the job log as an attachment in an email message. The email message itself arrives to my email account, meaning that my TOPIC and SUBSCRIPTION are correctly configured. But the attachment does not come along. Following the inscructions on https://docs.safe.com/fme/html/FME_Server_Documentation/ReferenceManual/About_Log_Files.htm#FME I am trying to insert the expression<LogDir>\\engine\\current|old\\jobs\\<number>\\job_<value>.login the "Email Attachment  (optional)" field. I am therefore trying to adapt it to $(FME_SHAREDRESOURCE_LOG)/engine/current/jobs/<number>/job_{id}.logThe problem is that <number> is not a defined folder, and I cannot find a way to replace it with a valid alternative. I already tried:$(FME_SHAREDRESOURCE_L

I had an issue in on of my lower environments where the FME Server related services (Application Server, Server Core, Server Database, Server Engines) were stopped and switched to Local System Log On keeping the workbench from being able to access the necessary source data directories. I reconfigured the services to log on using the established service account and am now receiving the following error."There was an error submitting the job. COM.safe.fmeserver.api.FMEServerException: Could not load all queues due to connection issue to job router. Please try again."Has anybody experienced this and have a solution?

We have two FME server 2021.2.6 instances running (one Test and one Production environment) and on both environments every job/workspace fails to run with the following error. A Python interpreter could not be loaded. Please ensure the workspace `Python Compatibility` is set to an available Python version On one of the environments an automation runs a workspace every 5 minutes. In the logging we can see that the jobs began failing at exactly midnight 11-25-2022. The runs before midnight logged no errors, the run at midnight and all runs after that failed. Does anybody have any suggestions what may have caused this, and how to solve this?

I'm looking to make a query which uses the spatial data in the planning brief to search cadastre, duct, duct_route and SL layers. So that I can change each planning layer can become searchable and have an output. We are currently working with MapInfo.

Hi, I am trying to expose an attribute from the _response_body returned from a http caller. This is the response: <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"><s:Header><o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><u:Timestamp u:Id="_0"><u:Created>2022-11-24T11:20:34.572Z</u:Created><u:Expires>2022-11-24T11:25:34.572Z</u:Expires></u:Timestamp></o:Security></s:Header><s:Body><CreateWorksheetResponse xmlns="http://webservices.whitespacews.com/"><CreateWorksheetResult xmlns:a="http://webservices.whitespacews.com/API/" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><CodeDescription>Success</CodeDescription><ErrorCode>

Hi, I have tried this method: https://community.safe.com/s/article/cannot-check-out-floating-license-but-have-borroweit didn't work. I have been given 2 accounts by my IT. my normal account, with locked license, I can't return the license because everytime I try to open fme desktop it shuts down itself. licenses are available. But, when I try to open fme desktop with my local admin account it opens just fine. BUT in license manager it shows as I am using 2 licenses?

Does anyone know how to tell FME Server which DNS server to use?Thanks.

I have a Workspace with a Schema reader to read a set of FGDBs on a network share. It is working when I run in Desktop but failing with theses errors when I publish to server. I have checked and double checked that I am looking at the same file share location in both server and desktop and I have published the workspace using the same user id that I'm using to run the workspace as well as using that id to run the run it on the server. I'm running version 2019.1.3.1 on both Desktop and Server. Anyone else encounter this before? Thanks, 73   Geodatabase Error (-2147024891): Access denied.74   Could not open File Geodatabase dataset <'My File Share Folder'> for reading

I understand that the license server will check the licenses back in if it loses contact with the client, but will the client continue to function with its already checked-out license, or having lost the connection to the license server does it stop working until it has a valid connection to the license server again?

I have an issue with FME Server not using the correct ESRI license. I have many workbenches running on my server that require a PRO license, all of them are running successfully except one. One of these workbenches had been running fine until a few days ago when it started requesting a ArcGIS 10.8 license instead of Pro. It will sometimes grab the correct license and run successfully but not usually. I have checked the python compatibility and all of them are set to FME Python 3.8+. I have checked and nothing has changed on our servers or with any of the workbenches. We are using FME Server 2021.2.6. 

I have a workspace published on FME Server that works lika a self-service where users can upload a shapefile, upload a pdf file and give information via user parameters.The Esri Shapefile reader has workflow option "Single Merged Feature Type"Running the workspace on FME Server works fine. I have created a server app for users to run the workspace and running the server app does not work. Does anyone know what could be causing this? Thanks in advance! This worked without a problem on FME Server 2021.1Now we use: FME Server 2022.1.2 Build 22627

When using a FeatureWriter with strings functions in the Dataset, the file is written correctly when using the Job Submitter service but not with the Data Download and Data Streaming services. Specifically, the string functions are not evaluated. In this particular case, I want to append the file name with the current date. It seems this has worked correctly in the past. Has something changed, or should it not be possible to do this using those services?

We recently upgraded to FME Server 2022.2 and were having issues adding an emailer to an FME Automation. After inserting an emailer within an Automation, we are receiving an error when attempting to validate the email after putting in the Client ID of the app registration that we created within Azure Active Directory App Registration. We are receiving this error when validating: Is there a walkthrough going over the new Microsoft Office365 email authentication within FME Server? I see the FME Desktop emailer has been updated to use a web connection, and I'm able to successfully create this web connection and send an email, but still having issues within FME Server email automation.

I am trying to add a web service on the FME server (Google Sheets - safe google sheets). I put in the credentials and click authorize, a pop up appears. It says "FME wants to access your Google Account", I click allow. Then the page refreshes and says: Make sure you trust FMESign in or provide access to FMETo sign in or provide access:Copy the authorization code from the Authorization code section.Navigate to FME.Paste the authorization code on the FME screen.Authorization codePlease copy this code, switch to your application and paste it there Where do I navigate to FME? On the Web?Where do I paste the code? I checked my google account's security for FME and there is no option of adding the code.

I am writing file geodatabases using templates. this causes all fc in the template to be written wheter there are features in the workbench or not. If i am writing the gdb in an automation the only method i can think of is to have a second wb that opens the gdb that was just written and test for features in each fc. but then there is the problem of delteing the entire talbe. the database deleter will only delete rows. the database updater works on features also (not tables)Any Ideas how to accomplish this?I guess i will have to go with the read the schema method. this machine is used for fme server as well as desktop and as such i do not have a single use license for arcpro. so i have no way of using arcpy that i can find. as for the reading the schema solution. @ebygomm​  i guess just using a gdb reader and connecting each fc to it's output? but what about domains?