General

How to rectify this error?

Hello I want to automatically add a tree to a class I want in classified point cloud data, how can I do that? Can you write me the order of the FME conversions, thank you very much in advance for your valuable information.

Hi,I have a MicroStation file (v8) with a table in it that I need to extract to csv. Can someone please advise? I am using FME2020.1 and I have attached the dgn.Many thanks,Chris 

I've encountered this error a few times and can't figure out what exactly is going on. 2022-08-16 08:34:06| 51.4| 0.0|ERROR |Esri Geodatabase Writer: Feature Type Definition 'Output' was requested, but not defined. Please visit https://www.safe.com/support2022-08-16 08:34:06| 51.4| 0.0|ERROR |BADNEWS: GEODATABASE_SDE writer: A fatal er I have an SDE writer after a reader that is reading a PNG. From what I understand it might do with the fme_feature_type being a PNGRaster but if i change or remove it I get the same error.

Hello, I have a (excel)list of points [x,y,z] which was recorded along a cable. The recording was done contiguously both upwards and downwards. Unfortunately without marking the reversal points. The starting point of the cable is the first point of the recording in the list. If I now generate a line from the point list using FME, I get a 3D line which runs both upwards and downwards. My goal is to split this line into two lines, but I haven't found a transformer that will give me the inversion point. My idea for determining the reversal point would be to determine the reversal point based on the distance to the starting point. The reversal point would then be the point from the point list with the greatest distance to the first point in the point list. How could I solve this elegantly in FME?Thanks a lot for your support

I can reproject CSAR point clouds but I can not write them to the CSAR point cloud format, only to ASCII XYZ.

Hello everyone!I have a problem that I don't quite know how to approach.I want to automate the production of coordinate frames in AutoCAD.The idea is to define a work area (by a square polygon) and extract the relevant coordinate frame for it, as attached in the file, and in the picture.The question is, how can I attach the coordinate labels to the relevant places on the frame?I would appreciate advice from those who can give..Thanks!

I'm working on a workbench converting CSV files with WKT geometry into autocad SDF. For some featuretypes i want to allow multigeometry. If I manually make a new feature in autocad map I can select some geomtric types that combine line and surface, point and surface, etc. .If I set the fme_geometry{0} in the schema to FME_point, i get the SDF point geometric type. But if I add fme_geometry{1}: FME_line, fme_geometry{2}:FME_polygon (This is what it looks like when I read a file with this combined geometric type into FME). It looks like only the geometry{0} is read and I also get the Geometric type point.Is there a way to use these other types? like point+curve, point+surface, .. ?screenshot below shows the geometric types available in SDF:

When I open a workbench in 2022 that is authored in an earlier version, the user parameters that contain file paths disappear. Below is the screen shots of a workbench in 2021:These are the screen shots of the same source info in 2022I am using FME 2022.0.1.1 (

Hi,today I have a problem with the excelwriter. I create a simple workflow:The result in excel:Why is it insert a comma and not a dot?The Data Inspector also show different types:Best regards,Florian

How Can I to merge text from imagem below  To   Using FME Desktop?  Thank´s

I have wS for KMZ i create the Ws direct get the data from website which perfectly working fine now the problem is this that most of data require is in HTML format I used the technique which here https://community.safe.com/s/article/how-to-expose-feature-attributes-from-kml-tag Now I need that ws where I get direct from website and join with that KMZ which converting SHAPEFILE  please anyone here who help me out please find the WS

See picture above for more context. I have made sure they are under the same coordinates when impporting them into the process as well as using the coordinate system setter but still no luck in making them overlap in the inspector afterwards.Im not sure if I am missing something obvious since I am new to FME or whether its an issue with the shp files. 

I have the Geodatabase data with around 40 milions of records in it with huge size but want read this data in parts like 1 to 10000000 , next adding it to next slot 10000001 to 20000000 to get it written in SQL database. In reader, geodatabase i have Object ID as one field with count to follow as per records.How it can be acheived with giving parameters in reader itself with different slots creating to migrate the data in different FME workbences as per slots.

I have long believed FME can read any GIS files. But today look like it can't handle a single band rrd (reduced resolution dataset) raster. Any workaround? or I need to go back to ESRI model builder?

Hello FME'ers,Welcome to What's Up Wednesday The Community Café Goes LiveIt's less than a week now until the FME User Conference 2022 gets underway, and I'm certainly getting excited about this event. One part that I'm running is called the Community Café, which has a lot of different activities and giveaways for all community members. You can find them listed on the FME-powered Community Café website:  When you're actually at the conference and stop by the booth, you'll have access to all of the activities, including City Guesser, the Community Virtual Badge,

Hello, I need to geocode information related to permit applications from a shared Google Sheets file. This file is regularly updated and contains two different tabs that I need to retrieve the information to geocode using Bing geocoding services. The output file is a Geopackage which allowed the creation of a map representing the two types of permits.The purpose of this workflow is to update the GeoPackage file with the updated information from the shared Google Sheet file, so that each time if there are new records from the Google Sheet file, these are added in GeoPackage.Unfortunately, when I run my Workspace, I get the following error message:OGCGEOPACKAGE writer: Requested feature type 'chiens_ptdx_re_conditions2' does not exist. OGCGEOPACKAGE writer does not have the ability to create new feature types. Create the feature type on the dataset before writingOGCGEOPACKAGE writer: A fatal error has occurred. Check the logf

Hallo FME community,I have a line and there are vertices on it. I want to have vertex as point. (exactly a tool like "Feature Vertices To Points" in ArcGIS) I used Intersector and topologybuilder for this and they don't exactly give me the vertex. Attached you find the pictures.     

In print it is possible to visualize the line created, totally without logic, and in red what would be the appropriate route.

I have XML file that contains GEOMETRYCOLLECTION for each object and it might contain lines, points, areas. I have this GEOMETRYCOLLECTION already in attribute but how to create multiple features out of those text geometries?

I am using FME Desktop 2021.2I pass my aws credentials to the s3connector through user parameters. The user parameters are all password type parameters.I am having no issue with the Access Key ID, or Secret Access Key but I am experiencing an issue with the Session Token.I'm finding that passing the session token as a password user parameter causes the following rejection:`fme_rejection_message' has value `S3Connector: There was an error connecting to Amazon S3: 'An error occurred (InvalidToken) when calling the GetObject operation: The provided token is malformed or otherwise invalid.'. Confirm that your credentials and region settings are correct. Some regions are not publicly available - contact AWS for more information'If I pass the session token as text type user parameter then I do not get this rejection and the workspace continues with the download from s3.   

Hello there I have a 20K features each feature has an attribute with Long text content each text with diffirent word count , we need to compare features to each other and extract the text features that have similarity ,Any way to do this with FME Thanks