FME Flow

HiI have a WB controller and another WB runner. The controller send some parameters to the runner (defined in the runner as published params.) via FMESJS.However when run on the server, some params are not passed, like the MINX, MIXY, MAXX, MAXY and/or EFFECTIVE_DATE.They are generated as attributes before the jobsubmitter and I can see them OK in data inspector.What might the problem be?Thanks

FME Server 2016.1For an on-demand data download service application with FME Server, I'm looking for a way to configure a download zip file name using a published parameter (requestor can set the value) and the Job ID etc. A possible way I found so far is:Publish the destination dataset parameter of the main workspace as a published user parameter. Create another workspace (say 'submitter') containing an FMEServerJobSubmitter which call the main workspace by passing the required destination zip file path. Run the 'submitter' as a Job Submitter Service.The destination zip file path can be created using the <results-dirpath>, FME_JOB_ID parameter, and a published user parameter of the 'submitter'. The <results-dirpath> is defined in the "fmeEngineConfig.txt" as the "FME_WORKING_DIR" directive. It works as expected, but the <results-dirpath> has to be written in the 'submitter' as a full path, and it's a little

When I try and run the install msi file to upgrade my existing FME Server to 2016.1, I get this error:'the system cannot open the device or file specified' I have downloaded the install file again but get the same error. I am trying to install on a Windows Server 2008 machine.Any Ideas?

HiI have a controller WB ans 5 runners running on fme server. Controller passes params to runnrs unis FMEServerJobSubmitter. Looing at the servers completed jobs I see 1.4 MILLION finished jobs - all of them runners. This is in the last 24 hours - the very last page is still in the last 24 hours.See the image for info. 1st pagelast pageOnly explainaition I hgave is the server creates a job for every feature processed, rather than for every WB.Why is that?

I recently installed 2016 64-bit FME. I had previously been running 2015 32-bit. I was a bit leery about going to 64-bit as I primarily write out to Esri formats, but after doing quite a bit of research I verified the readers/writers I use will work with 64-bit. That said, 2016 64-bit did work. I tested it on a workflow that pulls data from 16 feature types, writes out 6 feature classes into our SDE environment (72,163 total features), and contains 128 transformers. It took 10 min 19.5 sec, and the peak process memory usage was 1,319,888 kB. The problem is that I also ran it in FME 2015 32-bit and it took 8 min 37.3 sec and the peak process memory usage was 1,095,360. As another test, I installed FME 2016 32-bit. This process took 9 minutes 34.6 seconds and the peak process memory usage was 1,088,980 kB. Does anyone have any thoughts as to why the 64-bit version took quite a bit longer to run? Also, why might 2016 be slower than 2015? This really seems counter intuitive. Thank you for

I have found many articles about this issue.But I am looking for the link to download the required DLL's to use FME 64 bits with the SDE writer.And up to now I have not been able to locate the set of DLL's.Can anybody point me to the right download site?ArcGis 10.2.1 is installed.Thanks for any help.Erik Jan

I have a series of workspaces that are part of a web application and are called asynchronously via the REST services with an opt_requesteremail provided.  In the workspaces I create specific messages using attribute information and format them with a variant of the FMEServerEmailGenerator. I then have a text writer registered with the data to post on a success topic.   Note that if used the FMEServerNotifer instead of writing out the text file, and have no success topic published, then I end up with two emails, one custom email from the FMEServerNotifier, and the generic JOBSUBMITTER_ASYNC_JOB_SUCCESS. However, when it comes to failures, I run into a problem. In most cases I am forcing the failure via a terminator. I can generate the emails and use the notifier prior to a terminator. But then I end up with two emails, custom and generic JOBSUBMITTER_ASYNC_JOB_FAILURE.  I can try to write out the failure message to the text writer and post to a a failure topic, with a branch to a

I have a workspace that watches a specific folder for files to be added to it.The workspace then converts the xml file to an ascii file and moves it to a different folder. When I drop the file into the watched folder, it seems like the file isn't getting processed as the file doesn't get moved and the new file doesn't get created.

FME2016 run from Task Scheduler problem: TNS ORA-12154

Hi.I need some support for tender assumptions. Is it possible to install two kind of FME Desktop fixed (node-locked) license (e.g Pro and Smallworld) on single machine and use selected license in batch mode of fme.exe process running? I need to control license usage according to two different custom applications which use fme batch processing.

How can I setup SSL on FME Server with this type of configuration.

If I look at the web interface I receive errors. Error: Error communicating with FME Server. FME Server may not be running. Contact your FME Server administrator who can investigate the log files for further details.Connection refused: connect.Does anyone know what the source of these messages are?

After installation of FME server 2016 the list scheduled tasks is empty. How can I restore the cleanup tasks?

I am moving my license server software to a new server with the same name as the old one. Do I need to deauthorize my license on the old server first? If so how do I do that? I don't see an option in the LMTOOLS UI.

Hi all,I'm using a custom transformer developed using the C++ plugin SDK. This plugin works without flaws on FME Desktop 2015 and 2016, both in 32 and 64 bits. Now I'm trying to publish the workspace into FME server but I'm unable to make it work in there. The error I'm getting is:CompileDimentions_FMEDotNetLEACCubeProcess(FMEDotNetWrapperFactory): The clause 'OUTPUT OUTPUT FEATURE_TYPE CompileDimentions_FMEDotNetLEACCubeProcess_OUTPUT' within 'FACTORY_DEF * FMEDotNetWrapperFactory FACTORY_NAME CompileDimentions_FMEDotNetLEACCubeProcess INPUT FEATURE_TYPE CompileDimentions_AttributeCreator_3_OUTPUT DOTNET_ASSEMBLY_FILENAME FMEDotNetLEACCubeProcess DOTNET_ASSEMBLY_FILENAME FMEDotNetLEACCubeProcess.dll DOTNET_ASSEMBLY_FACTORY_NAME FMEDotNetLEACCubeProcessFactory SOURCE_FILENAME_LIST_ATTR @EvaluateExpression(FDIV,STRING,Value_source_files,CompileDimentions_FMEDotNetLEACCubeProcess) SOURCE_FIELD_LIST_ATTR @EvaluateExpression(FDIV,STRING,Value_identifiers,CompileDimentions_FMEDotNetLEACCube

Does FME support version 7.3 of Informix? If not, can I write some python code to bring the data in through a script? What versions of it does it support from?Cheers

 Hi Why do I identify myself every time I use a service hosted by us internally. Although I use AD integration to use FME . Can someone give us instructions how to avoid irritation ?   Regards Ahmed Jama

I have read this article: https://knowledge.safe.com/articles/678/create-a-c...How do you modify the fmeEngineConfig.txt file to make the necessary changes?

How to write a python script to insert current date and time to the database?

dbCursor.execute("""INSERT INTO FME_LOG(NAME, RUN_DATE) VALUES ('eee', datetime.datetime.now())""") is not working.

I am facing an issue in licensing FME Server. I wana know that whether the licensed file is .txt or like fme work bench license file .fmelic ?

hello all,In my situation i have two polygos that aren`t both allignment :My question is: has a transformer that use one polygon like refference to make the allign to edge another?Thanks in Advance,Danilo de Lima

I created a workspace and tested it in FME Desktop.Then published it to FME Server and tested it again.Created a schedule to run the job this morning (and every day) at 07.00 (it is now 08.10).Next I edited the workspace, tested and republished it (no changes to parameters).Checked the schedule and it was still valid and enabled.But no jobs where executed at the scheduled time (no passes and no failures).My machine was locked and running (no shutdown).Any suggestions why my job has not run?

I have a script in FME Server that gets called by a URL with parameters for the WHERE clause. The querystring on the URL looks like this:some_example.fmw?Year=2010&Neighbourhood;=Kensington-Cedar%20CottageThe WHERE clause in the database reader then looks like this:neighbourhood = '$(Neighbourhood)' AND year(event_date) = $(Year)Are these placeholders "parameterized" in the sense that an SQL injection would fail? If not, is there a way to do this?Thanks

I'm new to notifications in FME server and I'm trying to create a service that notifies our helpdesk each time a Data Download job fails on our fme server.I've set up a subscription with the appropriate email settings and subscribed to the DATADOWNLOAD_ASYNC_JOB_FAILURE topic.I then start topic monitoring on the DATADOWNLOAD_ASYNC_JOB_FAILURE topic and when I test the topic, the email is received exactly as expected. The problem I have is that topic monitoring stops as soon as I navigate from the manage notifications page or if I refresh the page. Is this supposed to happen? I was assuming that once started, topic monitoring would continue until explicitly told to stop.Thanks in advance for you help(Using FME server 2015.1.1)