Architecture

May I ask what is the default password for fmeserver database?

Dear FME community, We would like to have redunancy in our FME Form licencing using Flexlm. We have x number of licenses that should not be divided over n servers, but the same licenses need to be configured on all servers, master and backup. In case of crash of the master server the backup machines need to automatically take over. Only thing I could find was: https://community.safe.com/s/bridea/a0r4Q00000HbqijQAB/configure-a-backup-or-failover-license-manager The answer of Rylan doesn't specify if his suggested method is for load-balancing or/and a backup-license manager. The flexlm guide online states:"The following is an example of a license file that is configured for thre

If I install FME engine on seprate machine to connect FME flow core host (with default Flow database installed on same), does the trial FME flow standard license work on distributed architecture? Is ther any specific license required to configure distributed engine setup not the trial one?

If I reinstall FME flow software, can same license file be used again even this is a trial flow license? According to the licesne request file machine code is generating diffrent value. Do I need to request new trial license file if reinstallation is in place? Is it applicable for permanent license also in case of any reinstallation is needed? Please advise.

Hi community! I installed FME Flow 2023.1.1.1 on Ubuntu 22.04 with installer [1]. I choosesetup type "Distributed / Fault Tolerant" to use an existing Postgres instanceaccording to [2]. I then set up the Postgres database according to [3].I also changed proxyPort in /opt/fmeflow/Utilities/tomcat/conf/server.xmlto the correct port number. Then installed, enabled, and started the systemdunits according to [4]. Everything worked at this point and I could log in as admin and change thepassword as required. I could also log out and log in as admin. I thencreated a new admin user. When I logged out and try to log in as the new userthe landing page was stuck in an infinite refresh loop. I also deleted allcookies which did not have any effect on the constant reloading. The URL is https://view-db.vinci-energ

I am having difficulty attaching the Host Info Text File.Please advise how it can be submitted. Thanks in advance for your assistance.

I will be receiving a number of datasets that I need to run through the same process. I would like to figure out how I can set up the workbench to be able to put through several datasets at once time. There will be the same 4 inputs that need to be run through the FME workflow I have set up to output 3 files.I'm looking at working with something like this:If anyone has an example I could maybe take a look at to help set this up or have any tips/advice for doing this, it would be much appreciated! Many thanks in advance!

We are currently running FME desktop 2020 with a floating license server (2020). If we upgrade our license server with a 2022 floating license will the 2020 FME desktop installs still be compatible until we finish testing and upgrading?

Both the nodes sharing the same FME Flow System Share and FME Flow Database (postgres sql DB) which are on a shared network drive. The two express installs have independent URLs. So, in this scenario, there is no real fault tolerance from load balancer but if one node fails, the FME clients can change the URL to point to the second node's URL

Is there a way of doing parallel processing on multiple CPU cores inside a PythonCaller? I don't want to use a custom transformer for that because I cannot easily group my features using the group processing option. I have already tried the concurrent.futures.ProcessPoolExecutor but it fails in FME. The code works fine outside of FME but in a PythonCaller it raises a PicklingError.

Hi, I have an issue with import numpy in Python Startup Script in FME Workspace in FME Flow: FME Flow 2023.0.1 uild 23332 - win64 I guess that numpy package is already installed in FME Flow (and Form).In FME Form there is no issue but when I publish workspace on FME Flow I get: Python Exception <ImportError>: IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE!Importing the numpy C-extensions failed. This error can happen formany reasons, often due to issues with your setup or how NumPy wasinstalled.We have compiled some common reasons and troubleshooting tips at:

Hi everybody,Is it possible to fix the maximum file size in output ?I want to convert LAS data in DWG, but DWG in output is too large. Instead of one large file of 2 GB, I would like multiple files of 200 Mo (for example). Tnak you in advance 🙂   

Hello, I'm using FME to read IFC files and I would like to know if it is possible to get GeometryPropertyExtractor (to get traits) by calling the FME API into PythonCaller ? Thank in advance Best regards Bruno Hilaire

Installing ArcGIS Web adaptor IIS broke the Tomcat Web UI to FME server. Checked the Tomcat xml files to enable SSL 443 and SAML. All the config seems to be in place. "Unfortunately a backup or snapshot of the VM was not taken ahead of time." Anyone know how to get the UI back running? Pretty dumb mistake so there is not much dialog. But I have gone through setting up SSL with CA Cert and SAML.

FME Server Download site - only receiving 404 errors

How to Create an ArcGIS Online Web Connection (OAuth 2.0) (safe.com) I followed the document above. However, when trying to add the redirect url to the app in ArcGIS Online, it now requires a "url" parameter that is not mentioned in the documentation. I'm not sure what to put there.

I am IT manager and have followed guide to register new app in azure with recommended Graph and SP permissions, also granted on behalf of the org but for some reason all users are still getting this needs admin approval and it is driving me bonkers, Please can someone assist me. We are using FME 2020.2, Single Tenant and the guide i have carefully followed is here How to Create a SharePoint Web Connection for FME Form [Single Tenant] (safe.com) As i am admin, the connector works fine for me with the new registered app ID and other specifics but just none else,

I managed a few users for my work and we have a few fixed licence codes under our EULA. Some of these have been reused and to test this process I activated two under my own install of 2022.2. I now have two codes listed under my install and I don't really need either, and there seems to be no way of removing them. I have followed other posts about location the directory where these are stored but there are no files located.  How are these managed? I can see they are re-usable but do they get automatically get removed from the previous machine? Should I uninstall before these get activated elsewhere? Many thanks for any help

Hi all,Does anyone know how to fix his is error when execute ./fme python -m pip install sqlalchemy --target /Library/FME/2022.2/plugins : INFORM: Using Python interpreter from `/Library/FME/2022.2/fmepython310/lib/libpython3.10.dylib' with PYTHONHOME `/Library/FME/2022.2/fmepython310'INFORM: Python version 3.10 loaded successfullyCollecting sqlalchemy Using cached SQLAlchemy-2.0.20-cp310-cp310-macosx_10_9_x86_64.whl (2.0 MB)Collecting greenlet!=0.4.17 Using cached greenlet-2.0.2.tar.gz (164 kB) Preparing metadata (setup.py) ... doneCollecting typing-extensions>=4.2.0 Using cached typing_extensions-4.7.1-py3-none-any.whl (33 kB)Building wheels for collected packages: greenlet Building wheel for greenlet (setup.py) ... error error: subprocess-exited-with-error   × python setup.py bdist_wheel did not run successfully. │ exit code: 1 ╰─> [98

I have the following problem: I have a csv file with multiple columns. I have a user parameter and i want to rename the columns according to this user parameter. Even though the "Text To Find" parameter of my BulkAttributeRenamer gets updated correctly the Renamer doesn't rename the correct column but renames the previously set column and deletes the values in the newly set column (see pictures). The BulkAttributeRenamer only renames the new column correctly if I:   - open the BulkAttributeRenamer properties   - replace "Text To Find" Parameter with something arbitrary    - close the BulkAttributeRenamer by clicking "Ok"   - open the BulkAttributeRenamer properties again   - set the "Text To Find" parameter back to my user parameter   - close the BulkAttributeRenamer by clicking "Ok"  I'm using FME Desktop 2020.2.3.0 on W

I'm Daniel from GeoNet Technologies. As you know, Sam is no longer with us and I'm trying to install the application in one Pc specifically for this job. Please. Could you help me to re install it (FME 2021.1)Thank you in advance

I am using the FME 2020.1 Desktop (win 64) install with the MSACCESS_JDBC reader. The work bench command line is being used in an existing code, and successfully processes 27 of my 30 mdb.  The three mdb that don't process produce the following error:  net.ucanaccess.jdbc.UcanaccessSQLException: UCAExc:::5.0.0 java.lang.OutOfMemoryError: GC overhead limit exceeded at net.ucanaccess.jdbc.UcanaccessDriver.connect(UcanaccessDriver.java:231) at COM.safe.fme.jdbc.JdbcCommon.openConnection(JdbcCommon.java:464) at COM.safe.fme.jdbc.JdbcReader.openHelper(JdbcReader.java:186) at COM.safe.fme.jdbc.JdbcReader.open(JdbcReader.java:155)Caused by: java.sql.BatchUpdateException: java.lang.OutOfMemoryError: GC overhead limit exceeded at jdbc.ucanaccess.shaded.org.hsqldb.jdbc.JDBCPreparedStatement.executeBatch(Unknown Source) at net.ucanaccess.converters.LoadJet$Tables

We have recently upgraded FMEflow from 2022 to 2023, resulting in SSO stopped working.After changing the necessary encryption types in the service account on the AD server, we managed to get SSO working again.However typing the AD username and password does not work.The webgui gives the error : "Login failed, please try again."And the error in fmedirectoryserver.log is as following:Wed-23-Aug-2023 08:57:37.521 AM   INFORM   requesthandler   408039 : Authenticating user "******@*******.ORG" using SASL mechanism "GSSAPI" with KDC address "******.*******.org" and realm "*******.ORG"...Wed-23-Aug-2023 08:57:37.778 AM   ERROR    requesthandler   408010 : Exception: "LDAPException(resultCode=49 (invalid credentials), diagnosticMessage='80090346: LdapErr: DSID-0C0905D2, comment: AcceptSecurityContext error, data 80090346, v4563Wed-23-Aug-2023 08:57:37.779 AM   ERROR    requesthandler   408009 : Failed to authenticate user "******@*****

I am referencing this article: https://docs.safe.com/fme/html/FME_Server_Documentation/AdminGuide/configuring_for_https.htm?Highlight=ssl I am on Windows trying to implement using a PFX and password. I am on step 6b and running into an issue. I try to go to https://localhost/ and get "ERR_CONNECTION_REFUSED". It doesn't seem to let me see/download the cert at all. Any ideas? I have checked and double-checked the configurations changes including the path to the PFX and the password.

Installing FME 2023.0.1 doens't deliver the possibility to download and install transformers such as 'Emailer'. FME seems not to find the (correct) interpreter. See long error message below: "An error occurred while installing Python package with 'pip install --force-reinstall --no-deps --no-index --find-links C:\\Users\\YairLevy.AzureAD\\AppData\\Roaming\\Safe Software\\FME\\Packages\\23332-win64\\PackageFiles\\safe.emailer\\python --target C:\\Users\\YairLevy.AzureAD\\AppData\\Roaming\\Safe Software\\FME\\Packages\\23332-win64\\python\\safe.emailer --upgrade --no-compile fme-emailer' : INFORM: The workspace does not contain user Python. FME will attempt to use a Python 3.11+ interpreterINFORM: Using Python interpreter from `C:\\Program Files\\FME\\fmepython311\\python311.dll' with PYTHONHOME `C:\\Program Files\\FME\\fmepython311'INFORM: Python version 3.11 loaded successfullyTraceback (most re