- - Community Resources
Ideas
Product Updates
Events
Blog

Home
Forums
FME Form
Authoring

Authoring

Creating and organizing workspaces. How to use Workbench.

3,048 Posts
12,637 Replies

When you subscribe we will email you when there is a new topic in this category

3048 Posts

qubbiewuContributor

How to Upgrade the Version of FlexNet License Server

Hi, We are deploying FME Desktop 2022.2 in our server (it’s a virtual machine). The security team had done a security scan and expected us to upgrade the FlexNet Publisher to version 11.19.6.0 or later. However, the FlexNet installer downloaded from this link (https://fme.safe.com/downloads/) is Build 11.19.2. And it looks like bonding with FME Desktop so that we cannot upgrade FlexNet Publisher individually. How can I upgrade the version of FlexNet to version 11.19.6.0 or later? Thanks in advance. Best Regards,Qubbie

3574

12 hours ago

n.dContributor

asked in Authoring

Removing black areas in a transformed raster

Hello everyone, I transformed some Orthophtos in a new coordination system and the nodata areas are black. How can I make these areas transparent? (The output data formats are TIFF and JPEG.)(I have read the related discussions, but couldn’t find the solution for my case.) Thank you for your help!

588

16 hours ago

kkqContributor

asked in Authoring

Aggregation/Grouping in stream processing

Hi,I’m getting data from a streaming source (Kafka) that contains multiple geometry per feature read in WKT. To process the geometry, I “desaggregate” the feature first, produce a geometry from the WKT string, then try to aggregate it back with the Aggregator transformer. As stream processing doesn’t allow blocking transformers, I have set the Group Processing parameter to “When Group Changes”.My issue with this solution is that the feature leave the Aggregator only when effectively, the group changes which means when a new feature is read… I was wondering if there was a way to force the output of the latest feature, or if it was possible to make the process “Desaggregate/Produce geometry/Aggregate back” treat one feature per feature. Edit: this is most probably possible with a PythonCaller, I’m wondering if there was a “native” solution.

265

1 day ago

milo89Enthusiast

asked in Authoring

Are the dashboard workspaces available online?

I’m wondering whether the dashboard workspaces for various versions are available online anywhere.I note that this question has kind of been asked before for a couple of reasons, most commonly that a restore and overwrites the dashboard workspaces of a new FME Flow installation.While it’s probably best practice to download the workspaces before the restore occurs, with the best answer for the previous question was for the workspaces to be attached (attachment is no longer available though), I’m wondering if it would be possible to have some hosted or available online, potentially via the FME Hub.As always, thanks in advance.

172

2 days ago

sussexpeteContributor

asked in Authoring

FME Workbench and other FME Form software broken by VMWare Tools

Since updating our FME Form host computer with the latest version of VMWare Tools, FME Desktop, FME Data Inspector, and all other FME Form GUI software does not run.We briefly get a spinner and then nothing. The problem was noted on FME version 2021 but is a problem with all version of FME Form up to the latest version FME(R) 2024.1.3.0 (20240927 - Build 24627 - WIN64).It is still possible to run Workspaces in batch mode.The issue seems to be with OpenGL as indicted in the log, below.I would be interested if others have the same issue and, if so, how the issue can be resolved.Here is a snip from the log file:VMWare Tools v12.5.0.24276846Faulting Module = vm3dgl64.dllWorking Version = 3.5.3.2Faulting Version = 3.6.0.0 Event Log:Faulting application name: fmeworkbench.exe, version: 2021.7.41.21614, time stamp: 0x60f7b7a5Faulting module name: vm3dgl64.dll, version: 3.6.0.0, time stamp: 0x66a16726Exception code: 0xc0000005Fault offset: 0x0000000000e3696dFaulting process id: 0x1becFaulting

How to append a value to a list?

Hi!I have a list, containing between 5 and 50 values (varying). How can I append a value to this list? I can only assume there has to be a non-pythonic way, but I struggle to find one. My approach was to use AttributeCreator, but I can't dynamically specify the position in the list. Had the list size been fixed, then that's a solution - but not in this case.Any ideas?

2626

10 days ago

scarterContributor

asked in Authoring

Intersector and TestFilter produces result, but no geometry

Hello Forum, I have two polygon datasets, each with just one object in it. The edges of the two polygons abut in places. I’ve created a workspace where I‘m reading in the ‘Above’ polygon dataset and the ‘Below’ polygon dataset. I want to create a line feature of where they share a border. To do this I’ve used an Intersector which gives me a new _overlaps attribute… The exact line I require is where _overlaps = 2… So, I added a TestFilter to filter out where _overlaps = 2… But when I wrote that to a new feature no geometry was created. So, I added a LineBuilder, hoping that that would force the line to be drawn. But the resulting FeatureWriter is still not creating a line dataset - it creates a dataset, but with no geometry. Any ideas? Thanks,Stuart

639

18 days ago

scarterContributor

asked in Authoring

Artiificially creating polygons

Hello Forum, Is it possible to artificially create a polygon based on the lower edge of an existing polygon? Imagine I have an existing polygon, I’d then want to create a new polygon that snaps to the lower edge of the existing polygon. The depth of that polygon doesn’t matter, for example it could just be roughly 50 metres away from the shared boundary. What really matters is that is snaps to the lower edge of the existing polygon. An alternative approach could be that the artificially created polygon is a doughnut polygon which wraps around the existing polygon to say, a depth of 50 metres. I could then split it manually where required… I hope this makes sense. Any ideas? Thanks,Stuart

725

18 days ago

alc33Contributor

asked in Authoring

FME name machine parameter

hi !FME name machine parameter does it exist? I see the name of my computer at the beginning of the log but I don’t find where is this parameter.Thanks !

272

18 days ago

sunnywaygisContributor

asked in Authoring

DateTime Format - Round Seconds

Hi, I have a time format like below (hh:mm:ss) and I want to round seconds as below. What is the best option to achieve this? 00:00:22.464 > 00:00:2200:01:22.825 > 00:01:23Thanks in advance for your feedback.

742

22 days ago

hawaiialexContributor

asked in Authoring

FME vs Python in GIS editable feature layer and Microsoft Word Template Table

Hi folks!I am torn as to what workflow to use between FME and python. I am more comfortable with FME so hopefully FME would be the winner here.The workflow I am trying to achieve for the business user is to have a GIS editable feature layer containing field summaries translate into a docx with a table template (ideally with the same attributes as the GIS feature layer).A sample of the table template in the docx is below:Any time a new field summary project gets entered into the GIS editable feature layer, ideally, a net new Word document with a separate table with populated values from the GIS editable feature layer will populate in the corresponding values in the table within the docx. Any updates that are made to existing field work project records within the GIS editable feature layer would have the updated records/values also translate into the associated Word Document with table template values as well.So in the above, the values from the project name, date, crew, permits, divisio

1076

22 days ago

ebygommInfluencer

asked in Authoring

Warning message: Resetting a database that is still referenced.

Since upgrading to FME Flow 2024.1, we see these warning messages in the log files. Is there a way to get rid of them?

1425

22 days ago

stearnsweaverContributor

asked in Authoring

Issue when adding Writer

Before I updated to Form 2024.1.2.0, when I added a writer it would automatically name the Feature/Table and assign the geometry type. Also, if there were multiple readers in the workspace the add writer function would prompt to select individual or all feature/table names associated with the readers. Now the writers have to be individually added, named, and assigned a geometry type. This can be very tedious and time prohibitive in many cases (which goes against all things FME). Is there a default setting that I’m missing?

495

23 days ago

fme_can_do_itSupporter

asked in Authoring

Reading API and extracting geometry

Hi, I am retrieving data through an API using an HTTP caller. The data consists of points and lines. My plan is to pull this data, perform some attribute mapping, and then POST it to a website. However, I'm having trouble extracting geometry after flattening the JSON data. I used a Geometry Replacer, but it fails every time I run it. The error message says:INVALID_PARAMETER_GEOMETRY_SOURCEI would appreciate any assistance with this!

create non-intersecting polygons from multiple points based on attribute value sum

Hi,I have a file of points which correspond to buildings. Each point or building has a number of apartments (total 9000). from this layer, I would like to create zones for every 500 apartments, without intersection. I tried the neighbor finder with sorter assending on the distance then range mapper attributes but the result is not good because I should not have any intersection between the polygons. Help please :) Thanks a lot

15412

24 days ago

jsprattParticipant

asked in Authoring

MULTI_WRITER was not specified error: Why do I need it? How do I resolve?

I'd like to understand what this error means in the following context and how I might go about resolving it. I have a workspace that works perfectly fine if I run using cached features up to transformers just prior to a FeatureMerger then run from the FeatureMerger to a writer. However, when I try to run the entire workspace it results in an error that aborts the translation at the writer. I've also tried many other methods of joining these 2 streams and all are resulting in the same error output. MULTI_WRITER: No MULTI_WRITER_TYPE{*} or MULTI_WRITER_TYPE{3} was specifiedIt seems like I need both streams to be ready at the FeatureMerger at the same time but I have not been able to gain control over execution order or block passthrough features through a variety of attempts. The goal is to read from both a CAD model and a DB, then compare the two datasets on a unique key, then write an SQL statement to a text file or SQLExecutor. I've only attempted this with the text file writer while

3894

28 days ago

tbarker1986Contributor

asked in Authoring

Inconsistencies when reading File Geodatabase with a FeatureReader

Hello,I am experiencing some odd behaviour with the FeatureReader when trying to read in a schema from a Feature Class in a FGDB. I am using the “path_windows” attribute that contains the location of the gdb. When run like this, I often get a rejected message (see Caption 2). When I add in the hard coded full path into the Dataset field of the FeatureReader, the data gets read correctly. What is strange is that this has been working fine in the previous weeks when I had developed it. It only appears to be an issue since today. It also seems to read successfully when I run the workbench with caching to the Aggregator before the Feature Reader, then running again from the aggregator (no settings have been changed). I have tried using the path_unix field instead, but get the same error. I have also tried other datasets, but get the same issue.Has anyone experienced similar behaviour when using the FeatureReader with a GDB?… and any ideas to help with the stability of the run? The workbenc

586

28 days ago

bjudesEnthusiast

asked in Authoring

500 polygons, split into equal blocks of around 20 polygons that are spatially coincident/clustered

I have 501 polygons of various shapes and sizes. I want to split it up in clusters of roughly 20 polygons each. But I wan the clusters to be located together. I have tried the spatialsorter, which gives good results. But not quite what I’m looking for. Is this possible? Any help would be greatly appreciated. ThanksB

352

1 month ago

nedwatermanContributor

asked in Authoring

S3 connector unable to download files

Morning,I have access to the bucket and can read files. However, when I attempt to download a file I receive the following error:My admin insists I have the correct credentials, and I can download this file using WinSCP. Are there are settings I might be missing on the connector?

242

1 month ago

Jonathan SlopeContributor

asked in Authoring

Running workspace with "ignore failed readers" on gives error

Hi all, i've got a strage error. I have about 30 ArcGIS Online readers that i want to read, update and write back to ArcGIS Online. Now, the update part with the Changedetector workes fine. (Dont look at the mess ;). The problem:When i run the workspace, it gets all the 41K features that are in there. The other ones are skipped because it is not found. This works as it should work. After that it tries to search in groups accessible to the user, and then it says "error running translation”. Does anyone know how to fix this? I have attached the log file and the workspace. Thanks in advance!

262

1 month ago

danamosParticipant

posted in Authoring

Sloping beach volume calcualtion

Hi, I’m trying to calculate the volume of various areas of beach using point cloud data. I want to calculate it above a horizontal plane at a level input as a user parameter and I have individually references mif/mid polygons demarking the areas.I have been using the method at the below link as a starting point, but the problem is the beach is sloping, not flat, meaning using the z.median value gives an incorrect result.https://support.safe.com/hc/en-us/articles/25407483031053-Volume-Measurements-with-the-VolumeCalculatorAny suggestions for a solution would be gratefully recieved!

160

1 month ago

scarterContributor

asked in Authoring

Filling in holes in a polygon dataset

Hello Forum, I have a polygon dataset of railway land, but it contain holes where items such as buildings, tracks and signal boxes would be. I need to fill in these holes to form a continuous polygon. The image below shows a sample of the data. I’d want to fill in holes like those marked in red. But I do not need to close spaces such as those marked in gold. I’ve seen…. … but I don’t think that’s suitable for the task. I’ve also looked at Dissolver, but I’m not sure if that's the right way to go. Any ideas, please. Thanks,Stuart

586

1 month ago

checcosisaniContributor

asked in Authoring

FIND PARTIALLY "OVERLAPPING LINES"

Hi, I need to find into a network of GPS lines the location where 2 line overlaps or where a single line overlapThe problem is that of course the lines aren’t exact the same (the lines derived form GPS points so I don’t have a duplicate geometry) and only a portion of this lines overlapssee picture attacherd If you need the sample of shape dataset let me know thx Francesco

Using the WHERE Clause in a FeatureReader to search for features based on input parameters from a csv file.

I'm trying to use the WHERE Clause in a FeatureReader. I'm reading in an Oracle SDE featureclass and want to only select those records that match an attribute in a csv file I've loaded. I'm assuming that I have everything setup correctly where the attributes from the csv file are FME Feature Attributes. It seems when I add the @Value(col0) to my WHERE Clause, it breaks. How can I check to make sure it is setup correctly?

7066

1 month ago

fmeContributor

asked in Authoring

Generate measures on polylines with no measures attached in either coordinates or attribute table.

I tried generating measures on street segments but the measuregenerator is not calculating it right. It starts every segment from 0 instead of calculating from the end log. Any ideas how to resolve or calculate measures on segments with no measures? Thanks in advance!

675

1 month ago

Page 1 / 122

Badge winners

nimirat5has earned the badge Expert (Grey)
nimirat5has earned the badge Teacher (Grey)
nimirat5has earned the badge Student (Grey)
johnpruddyhas earned the badge Welcome Back
julioviniciushas earned the badge Teacher (Grey)

Show all badges

30,419: Posts

Terms & Conditions Cookie settings

Sign up

Already have an account? Login

An FME Account is required to contribute

Login to the community

An FME Account is required to contribute

Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.

Enter your e-mail address

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.

A product of

Company Products Giving Back Careers Contact Privacy Feedback

Safe Software respectfully acknowledges that we live, learn and work on the traditional and unceded territories of the Kwantlen, Katzie, and Semiahmoo First Nations.