Authoring

Hi there!I get tons of these messages from some workspaces created with FME 2020 (in Norway) and now  migrated to FME 2024: The Startup Python Script changed the current FME process locale from 'Norwegian Bokmål_Norway.utf8' to 'C' and FME has restored it back to 'Norwegian Bokmål_Norway.utf8'. It is undefined behavior to change locale and doing so may cause unexpected errors. For more information, visit http://fme.ly/PythonLocaleErrorI have read the post http://fme.ly/PythonLocaleError carefully, but it does not give me anything. I have nothing such as import arcpy or locale.setlocale() in my Python-code. The example message above is particulary strange, I don’

Hi,I have 79 single-band rasters, each a step in a time series, with Int8 values that reprepresent a risk class. I want to get the max value for each cell and use a RasterMosaicker to achieve that. Then I use a RasterToPolygonCoercer to convert to polygons for further analysis. My problem is that converting the raster from the RasterMosaicker is extremely slow and performance demanding compared to converting the individual raster I have before the mosaicker (the timesteps are converted in a matter of seconds whereas the mosaicked raster takes in the range of an hour or more). This is an example of my workspace:Why is it so much slower to convert the mosaicked raster? As far as I can see they have the same properties and dimensions. It does have more data but not by much and still most of the cells are nodata. Is there a faster w

Hello Forum, I have two polygon datasets read into a FME Form workspace: Dataset 1: Super Output Area (SOAs): This is where the entire authority area is divided into 165 SOAs. No part of our authority area is not covered by a SOA. Dataset 2: Air Quality Focus Areas (AQFAs): These are specific areas for a particular purpose. Only selected parts of the authority area are covered by an AQFA.  Datasets 1 and 2 are entirely different and do not share boundaries or nest etc. If that happens anywhere it is entirely coincidental. I need to know what percentage of each SOA intersects (overlaps) with an AQFA area. Some SOAs are going to be fully outside an AQFA. Some SOAs will be partially within an AQFA. Some SOAs will be fully within an AQFA. I want to know what percentage of each SOAs is within an AQFA. The results would be added as a new attribute to the SOA dataset as a p

Ever since the merging of SQLServer spatial and SQL Server non-spatial Reader types, my SQLCreators and SQLExecutors generate a warning:Microsoft SQL Server Reader: Table `___FME_Custom_SQL_Statement___' does not include a spatial column. Geometry will not be read In Form this is easily ignored, but it really messes up my Jobs overview dashboard on Flow, because it results in quite a lot of listings with warnings that do not need checking. And I can’t seem to find a way to tell FME that yes, I know, there is no geometry coming through in this sql, don’t worry about it because I did not select it - on purpose (or because it does not exist).I really do not want to turn off all warnings generically, I am just searching for a way to stop this particular warning. Before the merge it was easy: just use the non-spatial type, and the warning would go away. But that is not an option anymore unfortunately...  

EDIT - Solved, see comment below regarding using the term “Bearer”.Hi,I am delving into the world of Flow Hosted. I am undertaking a Proof of Concept to discover the pros and cons. Concept: I’ve bult a Flow app (note: Flow, not Flow Hosted) to drop a random file into an Azure BLOb storage. I then have a workbench to monitor the BLOb, and when a new file is detected I want to start my currently “paused” Flow Hosted Instance to fire-up and inspect the newly arrived data and report back to say it has found it!It seems that my best approach is to use HTTPCaller in my workbench to use the PUT method and the details copied across from here: FME Flow Hosted API (I can launch the instance from the API page so I know it works using PUT/instances/{instance_id}/action/start) but I am str

With the new spatial definition option in the FeatureWriter, it appears that Attribute Definition cannot be reverted to Automatic after first setting the Spatial Definition? In my case the format is set to PostGIS. Is this expected behavior? Am currently running FME Form 2025.1.1.0, Build 25623.

Hi, has anyone encountered this issue with 2025.1? Or am I doing something wrong? 

Hi There,I am using a Text-FeatureReader to process .csv for input into a geocoder.  The problem is that these user-created csv contains Line Breaks and the addresses candidates cannot be read into the geocoder or even the Text-FeatureReader (please see attached grapic)...  I have a StringReplacer ready to fix the issue downstream but the problem is that the TextReader can not read and pass along the Line Break data (it goes missing) and I do not see any settings within the Text-FeatureReader itself to handle the string replacement.  --FYI I am using a Text-FeatureReader instead of a CSV-Reader because the data schema is always unknown.  Any help would be super appreciated.  Thank you!.

Reading Utility Network Data in a FeatureReader with an SDE connection with resolve domains and resolve subtypes ticked.Domains can be applied different on each field dependent on subtype, but it looks like only those fields that are set to domains on the Unknown subtype are exposed on the reader. Subtypes that have domain fields applied to other fields, have these attributes resolved but they remain unexposed. Is this a known issue?

I am trying to create a webservice to access Sharepoint. FME has been registered in Azure but when I try to set up the connection the conditional access policy blocks my connection.It looks like it has something to do with the way the http user client provides info to Azure. With the FME default http user agent you just get a blocking error, with the system default http user agent you get this: It looks like the http User agent does not provide the device ID (apparaat-id): Not available (niet beschikbaar). The conditional access policy demands a registrered device so it blocks this connection.I can make a Azure connection directly from Chrome or Edge in other apps. what is the way to a solution for this problem? 

Hello,I seem to be outputting multiple folders when I run my app through data stream or data download.Tried connecting all connections to one feature writer but it seems to be limiting me to one excel file if I do that so I did multiple feature writers for each excel file that I want.Tested running my app through data download and data stream and it outputs multiple folders - one folder per feature writer.Was wondering if I am able to simply download all excel files right away without putting them into a folder or just output them all into one folder.Screenshot below.Feature writers under Microsoft excel format. Basically 2 sheet type. 1 is based on a value and other is count sheet

I need to assign a z-value to 2d points snapped along a 3d line.My steps  anchoredsnapper to snap the 2d points to 3d lineChopper to extract the vertex of  3d line create vertex of 3d lineNeighborFinder to find the closed vetex (of 3d line) to my 2d points   but now the question is how can be sure that the nearest vertex belong to the lines where my points are snapped ?  In red a point without z value but if I increase the maximun distance of NeighborFinder the risk is to assign the wrong z value (I mean the z value of the other line) So at the end my goal is to assign the z value to the points starting from the line where these points are snapped  (sorry for bad explanation...) thx for support Francesco

Hi everyone,I’m working with the JSONUpdater transformer in FME and need to add a key called layerDefinition to my JSON. The goal is to have:"layerDefinition": {}as an actual empty object, not:"layerDefinition": "{}" // stringor"layerDefinition": nullHere’s what I tried:Value Type = Plain Text, Value = {} → Result is "{}" (string). Value Type = JSON/XQuery, Value = {} → Result is null. Value Type = JSON/XQuery, Value = json:object() or map {} → The key doesn’t appear at all in the output.My JSON path is correct (json["operationalLayers"][0]), and the update type is Insert into Object.Question:Is there a way in FME to insert an empty JSON object using JSONUpdate

I’m using FME 2024 without any issues related to fanout. However, after installing the 2025 version, I’m facing a problem where the fanout is not working as expected. This seems to be a software bug.I am using a Creator to write shapefiles with folder fanout. Based on an attribute value, the data should be written into separate folders. But currently, it is writing only to one folder ("Low"), while the other two folders ("Medium" and "High") remain empty. Attached test1 fmw file.The Shapefile Writer is skipping features and showing the following warning message:“Shapefile writer: Ignoring feature with unexpected feature type 'High_priority_data'... Last line repeated 19 times ...”In FME 2024, this workflow works perfectly and writes to all the folders as expected. I believe others may also be experiencing the same issue in the 2025 version.

We have FME Form/Workbench installed on some of our Azure Virtual Desktop (AVD) machines, and it works fine overall. There is this recurring issue where the Connection Storage access is lost between each session. This is disruptive, and not always apparent, which wastes time and effort troubleshooting. In 2025.1.2.0, navigating to Web Connections under FME Options shows this each time:And navigating to the Workspace Defaults section yields:My connection storage is a Shared Database, which I thought was part of the problem, but I have more recently learned that a colleague of mine is using the default Personal Database connection storage and is also having the same failure to decryp

Okay, hear me out 😄In december we’ll be doing a webinar about Best Practices, but because it’s a bit of a tradition to make the last webinar of the year a fun one we’re going to call it the Worst (Best) Practices webinar. So we’re looking for workspaces that are complex, undocumented, badly designed with renamed transformers.Way back in the day the training materials included the Chamber of Workspace Horrors Powerpoint, that’s the kind of stuff I’m looking for.Feel free to reach out to me privately, anonimity is guaranteed 😃(Normally we do our webinars in Dutch, but depending on the response we can also do this one in English, so if you’re interested in that also please let us know!!!)

Goodmorning! I want to write a dataset with the postgis writer to GeoServer, but the result gives errors.  Process: A reader of municipal boundaries, and a reader with fire hydrants, the fire hydrants gets clipped on the boundaries layer, and then i want to write it to Geoserver. The postGIS writer says its succesfull, but when i inspect the layer in QGIS, there is no data, and i get the error: there is no item in geometry_colums. What have i done wrong in the postGIS writer? Can anyone help me?  Thanks in advance! 

HiI draw some 3d lines from point cloud but sometimes I snapped the wrong point so now I need to check if all my vertex are correct. So in the picture I need to detect the vertex encircled in yellow any suggestion ? thx Francesco 

Good morning.I’ve been testing lately a FME Flow 2024 version.When writing “Date” field types using the ArcGIS Online Feature Writer, the following warning masked as an error is thrown:D:\code\fme\source\engine\plugins\python\fme-arcgisonline\src\arcgisonlinefeatures\arcgisonlinefeatures_rest_writer_helper.py:557: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC).The FME 2025 Change Log shows this entry:It only mentions the Reader. Would it be possible to know if that deprecation was solved for the Writer, too?Thanks!

Hello Safe Folks,I am trying SharepointOnline Connector with a TenantID, Client ID and CLient Secret.I followed https://support.safe.com/hc/en-us/articles/25407443807117-Getting-Started-with-Microsoft-SharePoint#WebConnection https://support.safe.com/hc/en-us/articles/30678084674189-How-to-Create-a-SharePointOnlineConnector-Web-Connection-with-Application-PermissionsIn the second URL, it suggests to have 

I am looking at implementing something like this: https://support.safe.com/hc/en-us/articles/25407459193613-HTML-Page-with-Link-to-Download-Excel-File-FME-Flow-AppBut I don’t want to create a webhook for public access for the data streaming link, I want this restricted to the same role/group that has access to the server app - is that possible?

HiSomething strange. I just wanted to write shapefiles with a fanout based on a field in the attributes, and that no longer works.  No errors, it creates the folders in the specified location but does not fill them.  It selects one and ignores the rest. I don't understand. I've used it a million times and never had any problems.  Has anyone else noticed this? Is it the version or is it me?

Hi,I recently moved to FME Form 2025.0.3 from FME Workbench 2021.1.2.The install is on a central windows machine. Some workbenches run as other users. ArcMap and ArcPro (3.4) are also installed on this machine.All our workbenches involve ESRI enterprise geodatabase readers or writers, so require an ESRI licence to run.Users of FME all have named user licences for ArcPro, they are able to launch Pro and obtain a licence on the central machine.When I use FME Form there is no issue accessing the ESRI licence and using the readers/writer. However when testing with other users, who have the same type of named user ESRI licence, FME reports the error: “Worker 6428 > Unable to perform any licensing related tasks. Please check your Esri ArcGIS Compatibility workspace parameter, found in Navigator -> Workspace Parameters -> Translation. This 64-bit version of FME requires ArcGIS Desktop along with 64-bit Background Geoprocessing; ArcGIS Pro;

This seems like is should be so simple, but I can’t get it to work! I want to take a CSV file that has Feature Class Names, FieldPrefixs, and Feature types. For example:FeatureClass, Prefix, FeatureTypeRoads, Road, LineWildLandUrbanInterface, WUI, Polygon. This CSV file will be dynamic, meaning that the Feature Classes that will be summarized will change.I then have a SummaryPolygon Feature Class which defines the polygons on which to summarize. I want to iterate through the CSV file, summarize the data for each CSV record, and then add two fields with the prefixs (ie Road_Miles, Road_MilesPerAcre or WUI_Acres and WUI_PercentArea) to the SummaryPolygon. I thought the workspace runner would work well for this, but the Child workspace isn’t updating/showing the new fields that were created after each iteration. Meaning the schema isn’t dynamically updating with the two new fields on the next iteration. In my Reader, I have Workflow Options set

nvm