Transformers

PDF2TextReader does not recognize my published parameter for selecting a pdf file into the transformer. Is there any workaround this? PDF2TextReader runs when I select the pdf file directly but not when I use a parameter in selecting it.

It looks like Deployment Parameters might make some of our processes more manageable. Is it intended for use with workspace runners? Is there any documentation out yet for this new feature?  

I have a table of values with ID, Start, and End. Starting with the first row, I need to select the next row where the start value equals the end value of the first row. I need to repeat this process for the entire table. For example, I'd select row 1 then row 4 then row 6 then row 9 then row 13...Any thoughts on how to do this? 

I have this GML dataset (https://service.pdok.nl/hwh/administratieve-eenheden/waterschapsgrenzen/atom/downloads/administrativeunit.gml). I tried all kinds of configurations with the different GML readers (although I expect the INSPIRE GML reader to be ready for it). I can't get it to work. I also don't have much knowledge of the ATOM standard. Any directions for help?

I have an intermittent problem where an FMEServerJobWaiter fails to wait for a job to complete and rejects it after 30 mins-or-so when in fact the job is still running and completes successfully (it gets rejected with a 502 gateway error).Is there a difference in the way the FMEServerJobWaiter works compared to the Wait for Jobs to Complete parameter in the FMEServerJobSubmitter? - might that give more reliable performance?Using FME2021.2.

Greetings, I am trying to replace values using the AttributeValueMapper, it is not replacing the attributes in the field  I would appreciate any assistance to resolve this issue. 

I want to create an Workflow in a Workspace where i load data from a Transformer and then create an Folder with the Name of the Attributevalue and then write the other Data in an Excel file in the created folder. To Create the folder with PythonCaller was easy, but i have no idea how i use the Attribute Value in the Excel writer Destination.

HiI tried to download some data using OSM downloader but I recevid an errorcan ypu help plesae ? thx Francesco

or one reader and several writers? and there are some extra output feature must be derived from open data first.

I have a large polygonal dataset and a point dataset with 178 records. I need to select the polygons that have a point within them, merge the attributes of the two and then write out a polygonal feature class to later be consumed in GIS project inside Arc Pro. I have tried Point On Area Overlay but the output Point data does not contain any attributes from the Polygonal dataset and vice versa. I have also tried Spatial Relator / Spatial Filter with no luck. Any suggestions greatly appreciated!

I have a WMS that I can open in e.g. QGIS. Both the FeatureReader and the OGC WMS reader can show me the different selectable layers in "Properties". But when I start the translation, I get a 404 error saying it cannot be found. This is the WMS I'm trying to read: https://geodata.naturvardsverket.se/planeringsunderlag_o_strategier/wms?layers=Sannolikt_och_potentiell_kontinuitetsskog  Why and what can I do about it?

We are using HTTPCaller to batch geocode thousands of records, but we are running into an issue with special characters that are causing the HTTPCaller transformer to fail. As a workaround, we've been using multiple (20+ at this point) String Replacement transformers to catch and modify the special characters before going to HTTPCaller.  Geocoding the same input table using the Geocode Table wizard in ArcGIS Pro completes without issue.  Are there certain characters that HTTPCaller cannot handle, or is there a better or more robust workaround than using String Replacements? Can anyone offer insight into why the input table geocodes successfully in ArcGIS Pro without any data sanitization/cleansing in ArcGIS Pro, but fails in HTTPCaller?  Thanks in advance for any help you can over. @natalie_campos​ @acueva​ 

I'm currently using a file gdb reader, a statistics calculator to get the total counts, attribute manager to create fields called Today_Count and Yesterday_Count and then the conditional value in attribute manager to try and compare the two counts and return a 1 if they're exactly the same but I can't seem to get the comparison to happen. Also how do I set this up so that if the counts are exactly same I can send out an email notification?

Hello. I have a question please. I have a DWG resource that I need to transform to SVG. I managed to export the geometry, but I don't know how to bind the styles - line weight, transparency, etc. Can someone please advise? Thank you

Can AGOL Feature Service writer be used to write pdfs on AGOL?

Hi!  I have an issue with the Clipper-Transformer, that I would like to use for a batch deploy. The clipper input is a Shapefile with about 1.7 Million polygons, defining a grid. The clippee are a few hundred Point Clouds as LAZ, that should be clipped according to the grid. I use batch deploy because otherwise the Point Clouds fill up the disk space and make FME crash.  The issue I have with batch deploy is, that the $hapefile (Clipper) is re-read everytime a new clippee is loaded, which is very time consuming.  Thanks a lot and with regards, Matthias

So, I have a little issue, that I cannot get to the ground of. Maybe someone can help. So, I have this TIF File, which I am trying to convert into a SHP file. This is how the TIF looks: And this is how my FME Flowchart looks like:  But... When I let it run I get a SHP file, yes, but it looks like this:  Lots of triangles instead of one solid block. Can someone tell me, what the issue is? What am I doing wrong?

Does the SchemaScanner add an extra character to the fme_varchar(n) attribute?

Greetings,I have a weird issue where the ESRI FGDB writer runs with NO error messages.It writes out to an ESRI Shapefile, but the FGDB has 0 records???This is the FME output Total Features Read                                                      68587=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-                           Features Written Summary=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-Hazards_3857_20230613_Geom                           11021Hazards_3857_20230613_NoGeom                         11021Hazards_3857_Geom                                    11021============================================================================Total Features Written                                                   33063   The output in the FGDB? Any assistance is appreciated, it is really frustrating. 

Hi, I am reading a bunch of asci files and use a raster mosaicker and trying to write to a raster or mosaic dataset.I have trued seting creating new attributes geodb_raster_path set to fme_dataset and geodb_raster_type to 'Raster'. or 'Raster Catalog'I am getting error message: The raster type 'Raster Catalog' for mosaic dataset 'zzDataset' is not supported by the installed ArcGIS version 

Hello. I would like to ask. I have a workspace where, see the attachment, I have set a time filter (red frames). I would like to store various dates in this format in the database, for example the date for each specific month. Each cycle, a new date from the database would be automatically replaced by this filter based on the number of validly executed workspaces. Can this be solved somehow? I would probably solve the individual cycles with some kind of "counter" transformer, it will be more complicated to insert the date. Go in the direction of some parameterization? How do I ensure that the correct date is always set on the test filter? Thank you very much

I am doing the completion date subtracted by number amount(200 days) using Subtract Interval or Interval between dates using the completion date - DateTimeNow. the FME rejection code is INVALID_INPUT. Any suggestions is greatly appreciated

Can we migrate the data directly to Esri UN model geodatabase instead of migrating to Asset Package GDB, using FME Desktop?

Hello, I have a dataset that looks similar to the image shown and I need to create the value in the attribute ROUTE shown in red. I need to create a new value for ROUTE whenever Duration>1 or Duration is Null. The data needs to be sorted firstly by Name, then by TimeStamp.Then, whenever the previously mentioned condition of (Duration>1 or Duration is Null) is met, a new value needs to be created for ROUTE. How do I create a new value (with for example a new sequential number) whenever I come across (Duration>1 or Duration is Null) in my sorted data?

I have SQL SERVER DATA where ii need to migrate views only to Snowflake is there any way to create the views in FME and migarte data SQL Views to snwflake