Architecture

Hi all, I have a list of urls (50 in number). For each url there are 10s of thousends requests to be made.12 engines in my fme server.What I want to do use 5 of fme engines to run the jobs in parallel - so 10 jobs each engine.How can I do that?At the moment I have:xls reader -> sampler2 (first 10 urls) -> FMEServerJobSubmitter1 (submit in sequence, wait to finish) , sampler2 (connected to sampler1,not_sampled port (first 10) -> FMEServerJobSubmitter2 and so on. But it just runs the 10 jobs on one engine in FMEServerJobSubmitter1 one after another.

I'm having the following issue. The FME server engine can't access ESRI license in order to read / write to GDB. Although the ESRI license is clearly available (I can open and use ESRI products on the host machine). License type is set to Floating (concurrent) and borrowed for 30 days. Error message for SDE writer is:The Esri Product license 'ArcInfo' is unavailable because all licenses of this type are currently in use. Unable to perform licensing related tasks. Please ensure that ArcGIS is correctly installed.And for GDB message looks like:An ArcGIS license is already checked out. The product checked out is 'ArcInfo' . Installed ArcGIS version is '?.?' Unable to connect to the File Geodatabase at '[some_location]'. Make sure the correct filename was specified, and that the geodatabase wasn't saved with a newer version of ArcGIS than the one installed locally. The error number from ArcObjects is: '-2147220952'. The error message from

Does anyone have an example of a system architect diagram where FME is being used to validate and transform CAD data into GIS? Just looking at what the best practices are around the key components in an enterprise system.

I am a post graduate student working on 3D modelling using FME Desktop. I would like to know if FME Server is available free for the student community.

Hello, I have few workspaces created in FME 2016. If I would run them as they are in FME 2019 would they use old version of transformers or new (potentially with some improvements)?

Filter tasks can be added to FME Server 2019 Automations, as demonstrated during the FME World Tour.The example shown during the WT was filtering incoming Shape file datasets after a Directory Watch trigger had fired so that the subsequent workspace would only process files with a .shp extension. However, when the Automation logs are viewed, it indicates that a filter.fmw workspace is being run to apply the filter. Does this filter workspace tie up an available Engine license? If so, could it cause contention on a system with only 1 available Engine?

I am trying to install FME Desktop. And I am getting a which reads, "The cabinet file cab7.cab required for the installation is corrupt and cannot be used. This could indicate a network error, an error reading the cD-ROM or a problem with the package". Could anybody please help me on this?

I work a lot with Power BI and now have a request for a weekly report using information that is best run through FME ... so my idea was to automate running the workspace using windows task scheduler, have FME export an excel document that replaces the older version every time the workspace is run, import the excel sheet to BI and then put the BI report on a refresh schedule ... There are several problems though: Does anyone have any obvious, obscure or creative solutions?1. The workbench is saved on a mapped drive and I'm hesitant to put a copy on my personal drive, though I'm not ruling it out. The task scheduler (and cmd prompt) cant seem to find the file when I try through the mapped drive. 2. I've set up a schedule in Windows Task Scheduler but it doesn't seem to be running properly. Even if it says it ran successfully, no excel table is exported, like it does when I run it in the FME application. (I've also tried to do so in command prompt, because I figured I

We are in the process of setting up a new license server for ArcGIS and FME, and I'm struggling with getting the FME license up and running.I have read https://knowledge.safe.com/articles/19459/arcgis-and-fme-on-same-flexlm-license-server.html and https://knowledge.safe.com/articles/19460/specify-port-numbers-used-by-flexlm.html and have adjusted the FME license file to run om port 28001 (leaving ArcGIS to use the default ports). Using LMTOOLS to get server status, it says that the service is up:--------Status--------Flexible License Manager status on Mon 2/11/2019 16:48[Detecting lmgrd processes...]License server status: 28001@A05-P1-LIC003    License file(s) on A05-P1-LIC003: C:\Program Files\FlexServer\safe.lic:A05-P1-LIC003: license server UP (MASTER) v11.15.0Vendor daemon status (on A05-P1-LIC003):      safe: UP v11.15.0Feature usage info:Users of FME:  (Total of 1 license issued;  Total of 0 licenses in use)Users of FME_GUI:  (Total of 1 license issued;  Total of 0 licenses in us

I recently applied for a new student license. The next day I used the license, a new computer arrived.So I applied for a new license but could not get it.Should I wait until the next update?

Hello, One of our FME Floating licenses has expired and we've got a new one. However, I don't know how should I proceed to install the new one. I've got just the new .fmelic file and I have access to the server. Thank you in advance.

I'm trying to licence a new installation of FME Server, but I keep getting these errors if I upload or request a new licence respectively. I'm sure my license file is valid. Whats going on?The license file failed to uploadLicense request did not succeed   

I performed an upgrade of FME Server from 2018.1 to 2019, Windows 64 bit Server Express installation. Post install, I can get to the FME Server GUI but cannot log in to it. Have tried: logging in with AD credentials, admin/admin account, or SA account.Uninstall and reinstalling FME Server 2019Hitting different URL addresseshttp://servername/fmeserverhttp://servername:80/fmeserverhttp://ipaddress/fmeserverhttp://serveralias/fmeserverPlease help!

admin/admin tried other browsers.I've tried this: https://knowledge.safe.com/articles/79069/after-an-fme-server-upgrade-i-cannot-log-in.htmlBut I don't have that directory. I haven't run the postinstall.bat because I can't find it. Though I did find an icon image for it but no way to run it.

Hi I am trying to install FME Desktop 2019 onto an off network laptop Windows 10. Attached is the error I get during installation. I tried installing an older version of Desktop 2018 and this also gave me the same error. Then it rolls back and undoes the install.

Hello,i am attempting to roll out a silent install of FME 2018. The documentation is very good so i usemsiexec /i fme-desktop-2018.1.2-b18590-win-x64.msi /qb INSTALLLEVEL=3 INSTALLDIR="%programfiles%\\FME" ENABLE_POST_INSTALL_TASKS=noto run the installation.Unfortunately i get a message/ interrupt with a file in use error (i use /qr instead /qb to view the error). Is there an other switch to prevent this message? Best regards, Martin

Sometimes FME Server (2013 SP3) loses connection to the License-server. Is it possible to get an e-mail when there is currently "No active engine" on an FME Server installation? This should be possible as now we have to manually check now and then to see if FMEServer is "up and running"!

After installing FME Server 2018.1.2 ( Build 18590 - win 64 ), I'm getting the following erro message wehn trying toreach the Webgui from the server ( http://localhost/fmeserver ). Where can I found a log to solve that issue ?

Hi everyone,I use FME daily in many crucial processes I have developed here and I am running into quite an issue.I have done some research here but don't think I found anything exactly the same as what I have so I will explain. I have just been moved to a new Win10 64bit Machine. I do a lot of processes to and from Smallworld and different types of ESRI environments as well as a lot of Database reading and writing.I find any process I am writing or using that has been written in the past that involves reading or writing from an Access Database is crashing especially on the writing to the database aspect. I get the following as it crashes:Microsoft Access Writer: Unable to find provider 'Microsoft.ACE.OLEDB.12.0', falling back to 'Microsoft.Jet.OLEDB.4.0'. Microsoft Access 2013 Runtime might be missing from your system; follow this link for more information: http://www.microsoft.com/en-us/download/details.aspx?id=39358Microsoft Access Writer: Connection failed. Conne

You may recall that FME Server 2016+ has integrated a “Failover” mode. As a result, Safe Software has discontinued issuing the previous independent Failover license files in 2016+.  We still frequently receive failover license file requests from both clients and partners. Please be advised that anyone requesting an FME Server failover license via the new server licensing will receive a message stating, “Note: Failover license use is no longer supported with this version of FME Server. For up-to-date details, please contact your account manager, local partner or ." They will automatically receive a 60-day temporary license.  This notification was scheduled to appear Monday, February 11. Please note that this is only for FME Server 2016+ requests. Floating license server and desktop requests will continue to work without issue. If you have any questions, reach out to your Channel Account Manager or .

Hello, We have a server on which we have 4 engines installed. FME Version is 2016. In our setup on FME Server we have main workspace which is responsible for some preprocessing and then it submits child workspace using ServerJobSubmitter.  In some cases this child workspace also has ServerJobSubmitter because it processes huge data set and if we didn't split it into several runs then we woud get out of memory exception or have other problems. It looks quite nice but in some cases (probably when few jobs are executed also on other engines) in that child workspace we have an error:FME license system failure: The maximum number of concurrent FME instances specified in the license has been reached (-508)   What can be the reasson for that? ServerJobSubmitter is set to wait for jobs to complete

I have uploaded my python dependencies (various .py modules) to FME Resources as is described here. Resources are uploaded and updated using the rest api.My FMW's can then see the resources and use them. When I update or replace an existing module however the engines continue to use an older version of the module. Rebooting FME server resolves the problem but is obviously not a great solution.Any suggestions on how to get the engines to see the newly uploaded resources? Clear cached versions of python code? Ideally this would take place when the resources are updated.ThanksKevinFME Server Version: 2017.1 Build 17539 - Win64

I have several excel sheets that have same/similar structures, although some are missing their header names. I can migrate them to SQL Server one-by-one using FME. But I want to loop over the contents of my folder (i.e the excel files) and migrate them all in one go. How do I loop over them? I want to use the same header names for the files missing them as the ones that have them - the header names.

Hello everybody,please, Im trying to solve problem with FME license server. As I checked, there is possibility to restrict one floating license for specific usergroup (check there https://docs.safe.com/fme/html/FME_Desktop_Documentation/FME_Desktop_Admin_Guide/FMEInstallation/Restricting_Licenses_to_Users_or_Groups.htm). But, and its my question, is there any possibility to set exact usage time for specific usergroup?E.g. Just imagine FME License server with 2 floating licenses. I just wanna to restrict one license for usergroup called "GIS" only for daytime from 6PM till 6AM. From 6AM till 6PM, both licenses should be available for all users (doesnt matter of what usergroup). Is there any tool how to set it up please? Thank You so much for all ideas!Lubo

Hello, So I have an issue. I'm trying to run a workspace at work but there ar no standard arcgis licences avialable. So fme tries to use the arcpro licence. It gives this error: Unable to load a library in the folder: C:\\Program Files\\ArcGIS\\Pro\\bin. The error number returned from GetLastError is: 127Arcpro is set to work offline and there are plenty licences available. Anyone has an idea of what might be the issue. Also, arcgis 10.6.1 is installed with the right version of background geoprocessing and the version of arcpro is 2.3.0. Thanks,Simon