FME Form

In print it is possible to visualize the line created, totally without logic, and in red what would be the appropriate route.

I have XML file that contains GEOMETRYCOLLECTION for each object and it might contain lines, points, areas. I have this GEOMETRYCOLLECTION already in attribute but how to create multiple features out of those text geometries?

I am using FME Desktop 2021.2I pass my aws credentials to the s3connector through user parameters. The user parameters are all password type parameters.I am having no issue with the Access Key ID, or Secret Access Key but I am experiencing an issue with the Session Token.I'm finding that passing the session token as a password user parameter causes the following rejection:`fme_rejection_message' has value `S3Connector: There was an error connecting to Amazon S3: 'An error occurred (InvalidToken) when calling the GetObject operation: The provided token is malformed or otherwise invalid.'. Confirm that your credentials and region settings are correct. Some regions are not publicly available - contact AWS for more information'If I pass the session token as text type user parameter then I do not get this rejection and the workspace continues with the download from s3.   

I managed to create centerline (blue line) using suggestions by "@takashi" thanks for that., I would like to create additional lines (black line) inside the polygon, lines should be equally disturbed.  

Hello there I have a 20K features each feature has an attribute with Long text content each text with diffirent word count , we need to compare features to each other and extract the text features that have similarity ,Any way to do this with FME Thanks

Hello, I have a lot of attributes that need to be input into specfic cells in an excel template. Some of these cells are merged and some are not. How would i write each individual attribute into seperate cells based on the template? Many thanks,@Takashi Iijima​ @Mark Stoakes​ @nielsgerrits​  @ebygomm​  @jkr_da​ @mark2atsafe​ @jdh​ 

Hi everyone,Here's a post for sharing ideas and activities, for organizing social events, or for just passing on messages during the 2022 User Conference. Note: I can't guarantee to be monitoring this page. Best to tweet me on FMEEvangelist to get a more reliable response. Here's some information that I have: Things to Do In VancouverHere is a Safe webpage with some suggestions. This includes restaurants, activities, and similar. There is also the community page from 2017 that also has some suggestions. Official Event ActivitiesOfficial activities include: SoccerCyclingYogaFun RunHackathon"Rec Room" activities You can find full details on the conference website. MessagingThe EventMobi app has an Activity Feed where you can post messages:     ...and you can click on a user and send them a personal message too:  It doesn't look great for group chats, especially private ones. I recall most people used WhatsApp during the last conference.  So... I've created a

Hello everyone,I'm looking for an easy way to extract domain value from a gdb for validation.I know that you can use ArcGIS Pro to export a XML schema from a GDB, but I want to skip that step. I tried to use Schema Reader, but it doesn't give me the full domain values in the attributs.Anyone have an idea ? Thanks

I've an ArcGIS geodatabase feature class with some attributes. I do some attribute mapping and export data in a new geodatabase feature class.Everything works fine but some of the original attributes are not transferred in the output data. I don't know why......I've used the Attribute Manager to remove and rename some attributes, then I've used the Attribute Creator and the Attribute Keeper, the last step is with a final Schema Mapper and finally the new feature class: but there are some attributes (not interested by any transformation during the process) that are missing (the fields in yellow).Any idea? Thank you  

The obvious transformers (Rasterselector, RasterBandRemover, RasterBandKeeper) do not give the desired output. No errors are generated but all bands of the CSAR raster file are still present after processing. The bands seem to be hidden but I can not find a way to make them available for processing.

I have 2 different (postgis) writers (A and B), one of which is sometimes temporary not accessible. FME checks at the start if all writers (A and B) are accessible, and if not, fails to execute the workbench.So I wonder if it is possible (e.g. by the use of a parameter specifying which (only) writer to use) to bypass the "accessibility-check" of e.g. writer A so that only writer B is being used and the workbench is still being executed? I use this in a batch-script where I "ping" to A and B, and therefore know at the start whether A and/or B are accessible.

Is there a way to write custom key-value metadata to the output parquet files?

Hi I am trying to merge about 15 sets containing information about green infrastructure in to one singular dissolved, multipart polygon. In ArcGIS I would use the Merge geoprocessing tool to all the the layers into one, select all the features and merge them. Finally I would do a dissolve. In FME I have fed all the input layers into a Dissolve transformer (dropping attibutes), fed the area output port to an aggregator. I am unsure what to do with remnants - I have fed Unused Areas from the remnants port to the Aggregator but not interior lines (I presume these are the dividing lines that have been removed in the dissolve?) - is this correct? Many thanks

It's a simple workflow: connect to AGOL, check for data, copy the new features to a service on internal Portal. But it's tripping me up every which way. I got the basic workflow going nicely, but it fails when I try running it via a batch file through Task Scheduler. Keeps returning an error message that it can't find the service. Same thing happened with Python which is why I'm trying FME now.I'm connecting to Portal using a OAuth2.0 web service connection but it doesn't seem to like working through Scheduler.So I thought I'd try a different authentication (tokens) and found a recently released 'ESRI Portal Token Getter' but there's no documentation to really help.Anyone have any success with it?

I've been trying to work out how the light source definition is actually used within the SurfaceFootprointReplacer (with shadow mode set to perpendicular) transformer without luck. My end goal would be to extract an estimated surface of a 3D shape for a hydraulic radius calculation. If I know the shape's rotation from the horizontal axis, how does this get defined by the vector parameters?Defining a point along the face didn't appear to be the right answer, nor was offsetting a point... A simplified workflow showing a cube rotated 45° is attached to illustrate the issue.

Hello,Recently, we have installed FME Destkop 2022.1.We are aware of the fact that FME Desktop 2022 only supports Python 64-bit. On the same machine, ArcGIS Pro 2.8 is installed.Although Esri ArcIS Python 3.7 is selected as parameter and as preferred Python Interpreter, it seems to be impossible to use ArcPy. After many attempts, still the same error appears: "Python Exception <OSError>: [WinError 193] %1 is not a valid Win32 application." What could be wrong?  Kind regards,Pim van der Zwaag.

Hi there, Thanks in advance for any help. I have a point cloud that is in XY-MT format. My goal is to figure out where the openings are on a 'flat surface'. I have taken the point cloud and filtered it so only the data I care about is being used (PointCloudFilter). I am now left with a point cloud that clearly shows my openings. I am looking to show the XY coordinates of the 7 openings shown on the attachment. I have tried a few of the transformations, but I am not having much luck.   Can someone point me in a direction where I may find the positions of these openings?

I have 2 files: dgn1 (main data) dgn2 (reference) The two files should be checked against each other for duplicates. In the end, the dgn2 should be recreated without the duplicates contained in dgn1. Please help. Thanks.

Suppose I am reading 3 files through Feature Reader and setting maximum features to read = 10. Then it is reading 10 features from 1st file and doesn't read any data from other 2 files.

I really try to keep things nice and organized, but apparently all it takes is opening one bookmark and all heck breaks loose!!! This happens all the time and it's really straining my relationship with FME. I was working on another part of the workspace before noticing the chaos. I can't just hit undo. If anybody has any tips, it would be much appreciated. With Dynamo, I don't have this problem. Devs, are you listening?

I just upgraded to ArcGIS Pro 3.0 and upgraded Data Interoperability (FME(R) 2022.0.0.2 (20220518 - Build 22343 - WIN64) . I have several tools built in the previous version that are now failing. The only error message I get is literally: "Error running translation". That's it. Not very helpful. Has anyone else experienced this with the Pro upgrade to 3.0?

i have seen a lot of write ups with this heading but none actually do what the title says. i have been able to read a kmz and get it to a writer but the .json file is empty. there is no error message, just no data when i inspect the json. i have attached the workbench. i want the user to select a kmz and the workbench write it as a json, i am using ESRI JSON because the GeoJSON will error out.

I have two datasets with polygons that I would like to connect with the linebuilder in order to show the distances. One with adresses, the other with corresponding numbered objects.  For each object for each adress there should be a line (or a point when these are identical) For this I would like to use a centerpointreplacer for both followed by a linebuilder (and lengthcalculator). However the linebuilder generates polygons when there are multiple objects with one adress that have the same xy as the adresses and one or more objects that have a different xy.  I tried using a sorter with both datasets (the adresses on adress, the objects on adress and number). The sorter for the objects has a group by on the adresses. However:Grouping the objects in the linebuilder by adress I get polygons. Grouping in the linebuilder by adress and number generates points only. Any thoughts?

FME Desktop version 2022.1 (64-bit) How to find the source data (a feature class from Personal Geodatabase or File Geodatabase) geometry type is annotation (ArcMap or ArcGIS Pro based) or not?