Best Answers

I have renewed my maintenance license and want to install FME desktop 2018 (using 2017.1 now).I am looking for the download of the setup, but the only thing I can find is the Trial version.

Hello,unfortunately, I have problem with result from coordinate rounder and following process in changedetector.Example of my situation is below:There are 2 sources of data. One is actual to 2016 (technical map) and second to 2012 (plan of renewal). Plan of renewal was made from technical map in 2012. Now I want to compare these two sources in actual form with coordinates accuracy 0,01 m. I chose this way of processing - first I used coordinate rounder with X,Y precision 2 for both sources. I sent features with rounded coordinates to change detector. Values of coordinates are following:First sourceCoordinate 0: -536260.78633329261, -1226140.6460811181 Coordinate 1: -536258.07004669344, -1226118.8444450819Second source:Coordinate 0: -536260.7862999998, -1226140.6460000016 Coordinate 1: -536258.0700000003, -1226118.8443999998Result is disappointing... In spite of fact that I rounded coordinates to precision 2, change detector said, that coordinates are different, but they arent in real..

Hello there we have a simple WS GeoDb reader and SQL server writer and we are only renaming 2 attributes as shown but the table created on SQL still keep the same name as the reader ignoring the renamer transformeris there any reason why?

Hi,How can I draw a polygon (shp) using azimuth and distance in FME?Thank´s

Hi everybody,It is possible to distract objects automatically?For example:

I am running a workspace that generates contours on a point cloud and writes them to dwg.Workspace stalls indefinitely, doesn't crash, I get some warnings. Only message is "Sorter(SorterFactory): Completed 7.17% of intermediate processing" in the status bar.The .fmwt can be downloaded from here (OneDrive)

Hi everybody,  I am trying to figure out how to write metadata to ArcGIS Online Feature Service (update existing). I am able to read metadata from SDE using the "geodb_metadata_string" format parameter when setting the feature read mode to "Metadata" on the reader, but not being able to write to ArcGIS Online.  Is this even possible?  ?Thank you.

the FME Server documentation (https://docs.safe.com/fme/2017.1/html/FME_Server_Documentation/Content/AdminGuide/AccessControl.htm) indicates than you can assign ownership of something to another user, however it doesn't describe how to do this. I see the sharing options button for the repository and I can give full access, run and download permissions there, but I can't change ownership. Can you describe the steps I need to take to do this?

I'm doing a fairly straightforward IFC conversion. It runs once correctly and then every time I try it again, it errors out with the below messages. When I create a new writer it works, but also only once. What's up with that?Dataset template source `<Unused>' for writer GEODATABASE_FILE_1 could not be located Dataset template source `<Unused>' for writer GEODATABASE_FILE_1 could not be located f_72(CreationFactory): Dataset template source `<Unused>' for writer GEODATABASE_FILE_1 could not be located Dataset template source `<Unused>' for writer GEODATABASE_FILE_1 could not be located

Hi Experts, I am working with FME 2018.0. I have a set of roads as per the traffic congestion while red being the most, green being medium and blue being least congested. I have to extract the roads as per the color as below:Out of red, green, blue- red. Only red is extracted out of red, green and blue.Out of green, blue- green. Only green is extracted out of green and blue.blue as it is.I have tried using GeometryValidator, Intersector, but seems none of these are working. Any suggestions, advices

Hi,We have a FME Server 2016 with 4 licensed engines. We are standing up a new FME Server 2018 and we would like to transfer some of the engines running on the 2016 server to the new server. Is that possible?

An issue that's got me puzzled  A geometry from an oracle table a (Object a1) is used to clip a geometry from another oracle table b (Object b1)  These geometries visually appear identical, they are valid geometries and Oracle returns their relationship as EQUAL when tolerance is set to 0.005  If you clip object b1 with object a1, object b1 remains untouched and it is output untouched via the outside port.  if you clip object a1 with object b1, object a1 is clipped as expected, with geometry exiting both the input and output ports  A spatialrelator gives the interactions as OVERLAPS and INTERSECTS irrespective of which object is the requestor/supplier  Any ideas?

HiI have a raster with the following properties:I want to use the RasterExpressionEvaluator to set new values to each cell. I have written this expression: @if(A[0]<0.07, 0, @if(A[0]<0.5, 1, @if(A[0]<1, 2, @if(A[0]<1.5,3, @if(A[0]<2,4,5))))) but I can't get it work.Any suggestion?

Hi,I have a set of lines that make up a set of polygons. Is there a way to separate lines that goes around the edge of data set? (see picture below, only yellow lines)Thank you.

Hello, I have the following problem and hope you can give me a tip. For a statistical analysis of my city, I have to know how much building space is on a landparcel. For this I have a source with the parcels and one for the buildings. I wanted to solve the problem with the AreaOnAreaOverlayer Transformer. Now I have the problem that some buildings are on more than one parcel. In this case, the common parcels must be merged and all buildings identified. Here's an example:The Buildung 1 is located on the parcels A,B,C. Buildung 2 is located on the parcels B,D.At the end the parcels A,B,C,D must be dissolved.When i use the AreaOnAreaOverlayer with Buildings and Landparcels, i have a lot of areaparts with several combinations of building and parcel-ID. When i start to dissolve the areas again with the id of one common building, i loose IDs of the others. Please can you give me a tip how this problem can be solved? Thanks, David

Hi, I am new here,  I tried to convert a colored „jpg“ raster image to „grayscale".   Until now i used the programm „IrfanView“, where I set the saturation-value to „-255“,  but i had to do it for every image seperatly.   Now I want to use FME for conversion of multiple pictures at once.  Could you help me to find the correct transformer for this work?   Or is there any other simply way to convert a various number of colored jpeg images into grayscale?  Thanks for answers ……

Hi all,  I'm trying to merge two data-sets when they don't have a common field. What I would like to do is merge them using keywords that I have in one of the lists, so it should be a kind of a Feature merger with "contains" function, but so far I'm not really successful in finding a solution.   Here's an example:   List of IDs and keywords (1st data set): ID Keyword 111 Mc'Donalds 545454 Starbucks 1234 KFC 222 Burger King 343434 Golden Tulip List of places that I would like to assign ID to (2nd data set):  Place_name ID Mc'Donalds Amsterdam Central Starbucks Airport Stations' KFC Piazza Burger King Amsterdam Golden Tulip Hotel So in the end it should simply look like this: Place_nameIDMc'Donalds Amsterdam Central111Starbucks Airport545454Stations' KFC1234Piazza Burger King222Amsterdam Golden Tulip Hotel343434 Any suggestions?  Thanks

I'm generating a large GML based on data that i get from the SQL creator. The whole workbench is meant to be database driven. There is a main workflow that triggers this one: SQL_creator has dataset part A and SQL_creator2 contain part B, both are the same dataset and should be merged by ID (only attribute that they both have). They are split because of the amount of joins that the SQLcreator can handle is reached. I have a parameter $(sql_statement) that contains the SQL statement that is used in the SQL Creator. The attributes itself are dynamically named, so they cannot be exposed by setting value "attributes to expose". The Attribute exposer exposes the ID of the records, this is the only attribute that both creators have in common.Schemasetter exposes the dynamic attributes so they will be exported in the dynamic GML export.It works with the tester directly to GML but it does not show the dynamically created attributes that are created with the SQL_creator2 after th

This seems like a fairly simple task but I'm struggling to think my way around the problem.Middle point: master = it's unique idprevious = the id of the point to the left of itnext = the unique id on the point to the right of itHow would I connect these points to form lines by relating the master, previous and next attributes.

 Which rights/configurations that a simple user (not administrator) needs to be able to Extend/Rovert FME Extension for ArcGIS on FME Integrator console ?

Is there a way to smooth a line so the resulting line passes through all the original vertices?

For the life of me, I cannot figure out today how to eliminate dangle lines. End goal here is I am looking at which fire hydrants we have, that can be easily accessed by a fire truck that are not on a dead end street. Any assistance will be greatly appreciated.

We would like to translate a citygml file - but we cannot enable the FME CityGML Importer with the files supplied by FME (.oemlic and .dat). It does not recognise them as liscense files. Has someone managed to do that? Could this Person please post a help? Kind regards, L. Muller

How can I expose the "table name" parameter in the dialog box of the Oracle reader as an attribute I can use in a writer (to force it lowercase)?

I need to join 3 bands of an image, a band 3, 4 and 5 but when using RasterbandCombiner it comes out with 5 bands, why?