General

I have two separated polygons. both of them have unique identifier which is written inside polygons. also, both of them have area_official, but it is written on the bigger polygon. s, I want to associate the area and smaller polygon together. What I do to make it work?

This is opened question to FME Community. FME workspaces are very individual. But I believe there is a way quite universal way to test it (FME Testing Framework, rTest, DatasetValidator, Test Custom Transformer). This topic is about data quality. It is crucial!. How do you test your data in FME?

I have a workspace that uses ESRI ArcGIS Python 3.9+ and works as intended on FME Desktop. When uploading to FME Server, I receive this error: A Python interpreter could not be loaded. Please ensure the workspace `Python Compatibility` is set to an available Python version. Based on this link, Using Python with FME Server (safe.com), I believe I need to upload the correct python module to the FME Server Resources directory (presumably a python module that was distributed with the install of ArcGIS Pro 3.0). Both the ESRI software and FME Server are installed on the same machine. I'm having trouble locating the correct files to upload to the Resources. Which files need to be uploaded, and where would I find them?

I'm trying to run an old project in Desktop 2020 and keep running up against the error "The Geodatabase ... is newer than the ArcGIS installed on this machine. As a result the Geodatabase cannot be opened"Log file shows it checks out a license from ArcGIS 10.6.1 but I have ArcGIS 10.8 installed, although there is a Desktop10.6 folder in ArcGIS/Program files as well.Can I 'force' FME to select a 10.8 ArcGIS license or is there another work around?

I want to convert the features from ArcSDE to a pdf. I have an autocad file that contains some blocks to assign to points that can use as a template. I also have an Excel file that contains the color and width of each Lines that can to be assigned to specific features. I would like to know how I can assign the Autocad file to my feature. In addition when I try to determine the values ​​of pdf_fill_color using Atribute Format, the color doesn't change at all. do you know where i can find color code? (DWG Styler doesn't help me because I have color of features as code in an excel file and I just need to link color to feature. 

Hi Experts, Which tool to use to mark green (ish) pixels in my tiffs? Is there anything available to help me to hunt pixels with the specific color range and mark it.Thank youj

I want to check my FME processes using the FMW reader. I noticed that when reading transformers, the value in the attribute field "custom_transformer_parent_name" is missing if the transformer is an "ExternalTransformer". Is this a bug? Most of the transformers where this error occurs are custom transformers I created myself.

Hello everyone! First time using and writting something in community. I apologize if this is not appropriate place to put this question and also if I'm not going to write it based on some rules. Anyhow: Long story short, I have FME workflow which is working how it should on Workbench. But when I publish it on FME server, for some reason it doesn't want to use all readers or writers are not working properly.  Readers:3 excel1 csv1 mdbWriters:1 excel Result from FME workbench: Result from FME server: As you can see, worksheets in results are different. I believe I did everything correct with setups in readers and writers (if needed, I can provide screenshots on how it looks like). Tried also to make new Readers/Writers. Tried to make different repository and put it there. Also weird warnings that appear after the workflow has been runned:  Again, I apologize if I missed the place to post this, or also if I didn't write this question correctly. Anyhow, looking forward on some

Hello,- What are the best settings to read a large XML-file (650Mb) on FME server?- Is there a better way to read this XML file? o XML flattener will hold with Optimizing Memory Usage o Shorter XML files (300Mb) run without any problems.thanks  I have the details placed in a document. thanks for your help

Hi,I need to transform the value of this column and a new column...the values are always the same.  Thank´s

I have some photomesh files that I would like to turn into 2d top down raster images. Is there a way I can accomplish that in FME while preserving the georeferencing. Most of my viewing software allows me to export a snapshot, but the geocoordinates are not preserved.Original data (obj)Desired output (geotiff) I can't just use the texture files because they are spaghetti.

How do I set up my writer to only update after column 3? Or is there a transformer that locks the columns to prevent them from clearing every time there is an update? 

I would like to start an FME workspace that has 2 CSV readers with a batch script that specifies the path for the CSV files that each CSV reader (in red). The workspace also has a CSV and Shapefile writer (in green) that I need to specify the output paths for.Is this possible?  tC/.

I've got several workspaces open at one time, and have a hard time switching between them using the Windows Taskbar because their names are "MULTI - MULTI", "SHAPEFILE - MULTI" etc.  I know Alt-Tab will cycle through, but I usually want to click on the taskbar to bring it to the foreground. Is there a way to display the file name instead on the Taskbar? Not the directory as these get pretty long. So it shows "land-use.fmw", "birds-of-prey.fmw", "routing.fmw" or whatever. Here's what I've got open right now:

I've got a server app that uses an HTMLReportGenerator to create a simple web page. It contains a few paragraphs, a table and a very simple SVG chart. However, when I run it from Edge, the SVG is missing, and line spacing and font sizes are different. In Chrome it's fine.However, if I do View Source, copy the html into a new doc and open that in Edge it looks as expected. Styling is within the html, except that which it references from bootstrap@4.5.3/dist/css/bootstrap.min.css

I am getting an error when I write to ArcGis Layer I tried everything but still getting eroor ArcGIS Portal Feature Service Writer: Encountered an unexpected error. The error code from the server was '' and the message was: 'Could not access any server machines. Please contact your system administrator.'. Details: ''

Hello,I would like to present for you new approach for testing data in FME :). The prototype is on FME Hub or just ping me for more details via michpil@gmail.com. Thanks,Michal Pilarski

I am trying to use a HTTPCaller to call a website.The problem is that the website first is showing a loading-page while it's loading some data and after up to 8 seconds the new page is showing.The problem is that the HTTPCaller just gets the loading-page. Is there a way to let the HTTPCaller to wait until the new page is retrieved?

Currently we hardcoded the ‘URL’ & ‘Target File’ attributes in our FTPCaller parameters:Is there a way to specific them in a more dynamic way? For example, ‘Operating Account Structure - Export Budget 2022-09-22_13_27_55_PDT.csv’, the '‘Operating Account Structure - Export Budget ' part is static and '2022-09-22_13_27_55_PDT' part is dynamic date/time. How can we specific the dynamic part with wildcard something like ‘Operating Account Structure - Export Budget%.csv'? Thanks. 

i am trying to get the data in api but its only showing me the file name not shoing thw data http://40.76.139.235/fmerest/v3/resources/connections/FME_SHAREDRESOURCE_DATA/filesys/resttraining/Test.json?token=93c5c6c2-2025-411a-955a-cb481cf01c40 Output should be like this  https://www.nhc.noaa.gov/CurrentStorms.json

I have a street centerline Feature Class in a File GDB. I did a topology check in ArcGIS Desktop and it identified two streets that are overlapping one on top of the other (each street is identical in length). In FME, I set up a workbench with the SpatialFilter Transformer and two Inspectors to do a topology check. In the SpatialFilter I have tried using all the Spatial Predicates to test one at a time. FME does not call out these two overlapping street segments as does ArcGIS Desktop and ArcGIS Pro.  Maybe if I set a Parameter Condition Definition based on Shape_Length attribute field it might work?  Fyi, I am using this data as a test to help me improve my FME skills. Any ideas on how to get FME to call out these two streets?  Here is a screen capture of the two streets highlighted in red as seen in ArcGIS Desktop.   

Im trying to understand how to extract properties/radius from Oriented arcs. The ArcPropertyExtractor only works on "normal" arcs so a workaround could be to coerce the the oriented arcs to normal arcs, but can find a transformer for that. The properties exists in the geometry so cant be that difficult to extract it. Any ideas?

Hi!I got a problem with my app... I think!I got the same error message for anything that I read or transform.From a single simple shapefile polygon to LiDAR point cloud (las) i can't seem to do anything Here's the log:+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Feature Type: `'Attribute(string: UTF-8): `fme_geometry' has value `fme_point'Attribute(string: UTF-8): `fme_type' has value `fme_point'Coordinate System: `_FME_0'Geometry Type: IFMEPointCoordinate Dimension: 3(301381.02734451834,5038785.402441637,0)===============================================================Unknown coordinate system '_FME_0' specified - aborting I've tried geometry coercer and to reproject in simple epsg's but it doesnt help I'm far from good on this app... hope someone can help! Thanks your time!

Version of FME Desktop: 2022.1Transformer: HTMLExtractorIssue: Return format - List attribute does not behave correctlyDetails: When chosen List Attribute as return format, the results always show up as missing and no list can be exploded. Last known version that works is 2021.2.

Hi, I have a list of attributes "A_x1" to "A_x20" and I want to sum them up with the attributes "B_x1" to "B_x20 based on the name of the attribute name. Like if part of the attributename = _x1 then sum.  See table below as example. Thanks!