General

Hi.I just installed 2019.0 (build 19238), and tried to open an old workspace, which made it crash FME.After some work, I narrowed it down to a replicable error, where I open a blank workspace, and just try to add the Tester transformer. This alone makes FME crash.I tested whether my setting FME to use Python 2.7 was a factor, but it also fails with Python 3.7.Please advise.

I have fiber cable layer layer and this layer has field names To/From Structures. These structures are Point features (Poles, Buildings, Handholes). Poles are a separate layer buildings and handholes are also separate. if fiber cable is starting from the pole or hand hole and ending at the building.. i need to populate those starting and ending points of point features in fiber cable attributes i.e To/From Structures..Please assist what transformer should i use to fill out this inforomation in fiber cable. Thanks!Sarah

Any idea why my title bar is white?Just migrated to Windows 10. Using now FME 2019.1.1Thank you.

I am looking to convert an i.model (i.dgn) in a SnakeGrid format to a GIS .shp in British National Grid, using FME Desktop 2018. I have the relevant .dat file for the projection but am unsure how FME handles i.dgn files. Any help would be greatly appreciated.

First time user of FME. To make a long story short, I have a CAD file with a bunch of point data that I want to move into GIS. These are manhole locations. The manhole locations are fine, but of course the attributes do not carry over. I've run the 'Feature to Point' tool in ArcMap, which assigns and point location to every annotation feature.So, not I have a point at every manhole, and a point near every manhole that contains the annotation information of each manhole. Is there a way in FME to somehow link the annotation from P1 to the nearest manhole near that annotation point?I know there are also ways to work with the raw CAD file to achieve the same thing, but, no luck.

Please help to find out reasons for this errors. If i run job with cmd all ok. But WorkspaceRunner cannot run this fme job. ===============================================When running with WorkspaceRunnerFME 2019.0.2.0 (20190605 - Build 19260 - WIN64)FME Desktop ESRI Edition (floating)Permanent License.Machine host name is: tcoatyv12gisproOperating System: Microsoft Windows Server 2012 R2 Server 4.0 64-bit (Build 9600)Copyright (c) 1994 - 2019, Safe Software Inc.Safe Software Inc. The environment variable FME_USE_LM_ENVIRONMENT is defined, causing FME to use the floating license environment variables LM_LICENSE_FILE and SAFE_LICENSE_FILE (if defined).Shape Reader: Failed to open dataset which is neither an existing file nor directory An error occurred during the batch file execution, 1 translation failed. The following error message was raised:#2 : Sh

I'm unable to view the GML file in 3d. But could read the same file in 2d. What could be the reason.I have attached the gml file.

I'm trying to configure a new desktop for use with FMe Desktop and other software and i'm trying to figure out if FME Desktop gets any benefit from multi core processors and if so how many cores is recommended, i'm trying to decide between an 14 core I9 and an 8 core I7 specifically. There will be other software running simultaneously(Microstation V8I for example) but if FME won't go any faster with more cores then the I9 will be overkill. The technical requirements are not really helpfull for this as far as i could tell.

Hi Everyone, I would like to use FME AR in my cell phone, but the app in Google play isn´t available. How I can do?I need to build a drilling machine with FME...But I have some doubts...the FME AR works only with DEM formats or CAD formats??? Thank´s 

Hi everyone,I am getting the following error when using pythoncaller in FME 2019:Please let me know how to fix it. Thanks in advance.

I have House number field but some of values are not valid like start with zeros and spacesneed to remove zeros or spaces from red highlighted columns

I am creating an index and have a couple of tiles that have multiple images associated with them. See below, I have two polygons that overlap, they have similar attributes, but I want them to merge so both are in the same field (Example 3). Is this possible?1. First PolygonS2_File_Nam123_456_2018.tif 2. Second PolygonS2_File_Nam123_456_2017.tif 3. Desited outcome.S2_File_Nam123_456_2018.tif, 123_456_2017.tif  ThanksB

How to display who has voted for my post? I’m wondering if there is a way to display who has voted to my post 

Hi,  I am reading DGN files to write line segments in oracle spatial, in the same workbench I am using this table to join those line segments and write the out put geometries in another spatial table.  Now my problem is I want to keep these two processes in the same workbench and want that the table which holds the line segments should be populated fully before the line joining process starts, I can use workspace runner but in such case I have to divide these two process. Can anybody please suggest any work around.

So, I was very excited about the new feature "computer vision" after attending the FME World Tour earlier this year. Finally I can get FME to do the same for me as Google Photos, namely find objects in a large set of photos.Hugely dissapointed when I actually started looking into this. VERY LITTLE documentation. Found this blog post though: https://www.safe.com/blog/2019/01/fme-does-computer-vision/ I cannot even get the GUI to mark objects in my photos to run. After a little time on Google I can see that I'm not alone... Many having troubles both with preparing photos and using the transformers.Really Safe Software, using this as one of the new key features for 2019 and it seamingly does not even work properly...Please, can you publish some proper documentation and examples like you always do. I will not waste any more of my time until I now this works

Hi,  Since I came in this morning my FME Desktop has been running very laggy. Every time I try to move a transformer/reader/writer it stalls and then the buffering wheel comes up for 30 seconds. I have both 2019 and 2018.1 installed on my machine and both are running the same way. Any ideas how I can fix this?Thanks for any help.B

FME 2017I have a Schema Reader that is just use to input a file path, nothing more.The filepath is sent to a feature reader that I want to accepts multiple file types: .csv, .dxf, .dwg, .shp,The feature reader has the "generic" file type set and the filepath is provided by use "fme_dataset" from the Schema Reader. I do not understand how to do this.In the Output ports section of feature reader, In the "Specified" section I want to have "csv, dxf, dwg, shp" as separate output ports but it does not work it just prompts me for a file dataset instead.In the output that I can get the number of features is correct by there is no data.Is the only way to do this is to have multiple feature readers with the reader format set to the file type in question?

Is it possible to migrate workspaces between FME desktop and datainteroperability extension in Arcmap?

I have two oracle recordset(output of sql executors).let me say recordset A has two column segment_id and cable_idand one more recordset B has segment_id and Previous_segment_id record set ASEGMENT_ID | CABLE_ID21 | 0111 | 053 | 068 | 11 | 0 Recors set BSEGMENT_ID | PREVIOUS_SEGMENT_ID21 | 111111 | 5353 | 6868 | 11 | 9Function needed here is... if the set cable_id of segment_id is 0(zero), thenI need to loop thru Second set B by fetching previous Ids.(i pasted

I have excel file where empty Cells but have space on cells so when i transfer from excel to SQL so row are not Null so there is any way to remove space from cells in FME ??

Hi,I don't really know how to solve my current issue.ContextI have data as follow :IDCIS1CIS2CIS3TPS1TPS2TPS30001AMACHLLOR780102414200002LIVAMARBN681702895..................  The TPS columns are times in seconds. I need to add a delay to these times regarding the corresponding CISX value (e.g. add 1000 when CIS is 'AMA', add 1500 when CIS is LOR...).Then I need to sort the values to get the quicker CIS regarding to the TPS time with the delay added.IdeasTo do that I think that putting all my CIS and TPS in a list with two attributes can help me, but I can't find how to do it.What I think I need to have as a first result (to start manipulating my data) :ID0001List{0}.CISAMAList{0}.TPS780List{1}.CISCHLList{1}.TPS1024List{2}.CISLORList{2}.TPS1420 I tried with the ListPopulator, it works fine if I give it CIS as prefix I get my list but of the CIS only.I can put two ListPopu

Hello ! To test the new 2019 RasterObjectDetector feature, I wanted to benchmark the tool with my own dataset, and therefore, making my own annotations.As explained in this post, I wanted to run the "opencv_annotation.exe" tool. However, even after carefully checking the command line, I still get some errors of missing dll's (see screenshot below), particularly those :MF.dllMFPlat.DLLMFReadWrite.dll  Is there any required decencies that I missed to install ? Thanks !@dmitribagh

Below I have included the python code I added to the startup script, how do I include the zip file module if possible?import osimport zipifle def convert_to_zip(path):for root, dirs, files in os.walk(path):for filename in files:if filename.endswith('.ghg'):# print rootoldname = os.path.join(root, filename)newname = oldname + ".zip"os.rename(oldname, newname) def convert_to_zip(path, extract_path):for root, dirs, files in os.walk(path):for filename in files:if filename.endswith('.zip'):# print rootzf = ZipFile(path, 'r')zf.extractall(extract_path)zf.close()  convert_to_zip("")

Howdy Everyone,I'm playing around with the fmear format and I was hoping to garner some advice. I have a georeferenced feature class of a building, it is just lines and polygons. I set an extruder on each feature and wrote it to fmear, not very complex at all. When I try to see the model in AR, I see its loading x of x layers succesfully but my phone keeps scanning for ground. What I mean by that is, I have a perfect floor and the mesh is not red but I just keep scanning like I can cover my whole office in the white mesh. I expect the building to pop any second but I just keep adding more scanned mesh. I'm beginning to think my AR is gigantic or something with the scale. Do I have to add any extra transformers to change a feature class of a building into a pocket-sized AR feature? I didn't notice any talk of that in the tutorials. Thank you!

Can anyone tell me what kind of error this is?CSV reader: Detected excess data and/or delimiters in addition to the defined schema in line 3523 with value '3.53,0,3.53,0,0,0,0,3.53,0,0,0,130299203063,258,201903,0,0,0,0,0,0,0,0,0,0,0,0,0,3.5682002,2302,201903,0,0,89.33,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,42.3025,-83.40304' read from file 'P:\Office Depot\FME Workflows\Local Update Workflows\Sales by BG by Store\Workspace Runner - 7h\3. Workspace Runner\Outputs\Sales_by_Store_by_BG2.csv'.  Excess data will not be read.  This can occur if the file is not uniform in the number of fields per row or if fields have been intentionally removed from the source feature type.  In order to read the excess data, recreate the source feature type and set a larger value for the 'Maximum Rows to Scan' option to scan additional rows for fields.  If the file contains field names, ensure that the field names line represents all of the columns in data rows, or enable the 'Scan for Addition