Best Answers

I'm having trouble using the XMLFragmente in conjunction with a HttpFetcher. The results of my httpget are correctly stored in an attribute with ISO-8859-1 encoding.  However, fragments generated by the XMLFragmenter seem to be UTF-16 encoded and I can't find a way to keep the transformer from changing the encoding.  Anyone have a good idea on how to change that?  Thanks!

Hi all,  This is the situation: I have 2 lines (red and green) and a lot of points who should be matched to one or 2 of the lines. This works fine with the neighbourfinder but only in the cases where the lines aren't equal to each other. In the cases 16-3, 7-6, 8-5 and 9-4 the points who should be matched are on the same location and the lines are at that spot also equal to each other (I know it's a bad drawing but otherwhise it would be confusing :) )  If I do this with the neigborfinder (combined with list exploder) I get too much information (I'll explain with 1 point as its the same case for all points) in scenario 8-5 (circled in blue) I get information on point 8 from the red and green line and in point 5 I also get information on the red and green line while the situation I want to get is red information on point 8 and green information on point 5.  I need to find a way to get the right information out of it. I need to find a way to check in the neighborhood of point

Hi everybody,  I have a polygon file that have many polygon. I want to get the vertex intersections between the neighborhood polygons. And then, the vertex will be convert to point file.  Could you please give me the solution to do that? Thank you  It looks like the picture :

I have a list of features, and I want to output a permutation of all combinations of two and two list members to a csv file. Example: Feature 1 List{0} = 11 List{1} = 22 List{3} = 33 Feature 2 List{0} = 44 List{1} = 55 ....more features  Should produce this csv-file: 11, 22 11, 33 22, 11 22, 33 33, 11 33, 22 44, 55    Remark: This is feature 2 55, 44 ....  The lists seem to be fine, I can use AttributeExposer and output single items. So my challenge is to output the combinations while not knowing before rruntime how many list members there are (will most often be 2, and generally less than 4).  I have been experimenting with listExploder to give me one line per list member, but it leaves me with the combination problem. I'm new to FME, so a suggestion of appropriate transformers would be appreciated. Thank,s. Regards Erik 

When loading MasterMap can I choose identical schema?

tab file output with missing attributes

Hi All,  Hopefully this is a quick question. Basically I have a bunch of 8 polygons, with no attributes. Basically I want to add a ID to each of these, but taking into account their location to each other. I.e. ID 1 should be next to ID 2 etc, similar to the image I mocked up below.  The Counter just randomly assigns an ID, but not in order. Similar with the GOIDGenerator.  The only other thing I have that links the polygons is a line feature, also seen in the image, which either Crosses or Touches each polygon. This line is orientated running from North to South, however in other instances this could be any orientation, so I can't try and extract centre points etc from polygons.      I'm almost certain I don'e something like this before, but can't remember how, and it has me stumped!  Cheers, Tony

Hi Folks, I'm trying to work out what's going on here.      I have a series of lines in WGS84. I run them through this process:  LengthCalculator -> Reprojector (to _AZMED_) -> LengthCalculator.  This gives me two lengths for each line, one in WGS84 "units" (meaningless themselves), the other in _AZMED_ units (metres I think).  I expect the absolute values of these lengths to be different, but the relative values to be the same (i.e. that I can sort by either length column, and that the order will remain unchanged).  However this isn't the case - the relative values are different.  Sorted by Azmed you see:   Sorted by WGS84, it's obvious that the azmed order is different.    However this doesn't seem to happen with polygons and the AZMEA projection - their sort order seems to remain consistent.  So the question - what quirk of projections am I missing? Which distance is "correct"? I know that different projections have different traits, but

Hi for all! I have  xls table with huge datas about inspection for different zones as shown in attached picture (this is the small example). How can I write text values from "Area n." column to "Area"? F.e. for rows with "Area n" 1, 12, 3 I want write East gate in "Area" column and etc.  Thx

Hi All,   Could anyone know how to transform values in a multiple rows to be in a one row like the screenshots below?  consider the source of this table is arcmap!       Thanks in advance Best Rawan 

Hello, ?is it possible to set the "Sampling Amount" parameter of the transformer "Sampler" from an incoming attribute? I understand this value could theoretically change per row of data, but it would simplify our process greatly. Thanks! Using FME 2015.1

I have assembled table in SpatiaLite holding 30 million points of depth sounding observations originating from a number of vessels, each with a large number of files. To keep some metadata about where each point originates from, I've kept the file path and name in an attribute called "filepath". From the attribute "filepath", I need to extract a specific part which holds the name of the vessel. I guess it would be some regex in use here?  Example of the attribute's content: \\folder\\VESSEL_Lola\\folder2\\file1.shp \\folder\\VESSEL_Maria\\folder1\\file2.shp \\folder\\VESSEL_Lily\\folder4\\file3.shp \\folder\\VESSEL_Christine\\folder1\\file4.shp \\folder\\VESSEL_ClaudiaMaria\\folder2\\file5.shp \\folder\\VESSEL_Maria\\folder3\\file6.shp and so on..  I need to extract the "VESSEL_Maria" etc. from the attribute and map to a more explanatory value in e.g. AttributeValueMapper. There is only 12 different "VESSEL_YY" categories, but a lot of di

trying to convert NGDC HYD93 format data (b93) to ascii text xyz or csv. using CSV as the target format, i'm using coordinateextractor to expose the xyz values. the problem is, the z value is being converted to a positive value, while it is negative in the original data. I've been plaing with paramaters in both the coordinate extractor, the target writer featrue type, nothing. any thoughts, either preserving the negative value, or multiplyiing the attribute by -1 by a paamater in the writer, or an arithmatic operator for the writer value?

Are there any plans to add an "ORDER BY' parameter to readers that query SDE data?  I'm trying to process millions of records from versioned SDE feature classes in FME.  I need to read data from an SDE version so I think I'm limited to the ESRI Geodatabase reader to do that.  Since I'm using the StatisticsCalculator transformer to summarize values from the rows based on a common ID, I'd prefer to have the data read in order by those ID's.  That way I can utilize the "Input is Ordered by Group" option to make the transformer more efficient.  I could use a Sorter transformer to do the ordering before statistics are calculated, but that means I have to load millions of features into memory.  I'd rather just have the data ordered for me by the database on it's way into the workspace.   Another alternative I tried was using the SQLCreator and have the database run the summary statistics for me with a GROUP BY statement.  I only need attributes,

Hello everyone,  I would like to take a set of data in a grid and divide each polygon so that they are all cut up into whatever number of pieces I specify. I have tested this using the TILER transformer and it works just the way I would expect, cutting a square into 256 pieces. However, it only works if I send in one polygon to get diced by the TILER. I would like to send in 1000's tp get cut up. Currently when I send 1000's it dices the entire dataset, not each individual polygon.  I was hoping there would be a "group by" option in the tiler so that it would tile each polygon based on an attribute. That is not the case. Perhaps there should be a transformer called "Tiler Hopper" that feeds the tiler each individual polygon to get shredded.  Does anyone have an idea of how I can emulate this imaginary "Tiler Hopper"?  Thanks     

I made a custom transformer and exported it to the network. Next I made a new version of the transformer. When I open the transformer for edit, FME asks which version do I want to edit. This is okay.  However, when I add the the transformer to an FME script, it puts in the latest version. What if the FME user wants to use a previous version? Is there a way?  Thanks

Hi,  I need to generate a grid with dimension keepped from attribute value... but fme log error say that grid_cell_count must be positive integers ...  is there a way to forcing an attribute's type to integer ?  thx a lot   gd day

I need to convert from ESRI to Autocad. Our symbols in ArcMap are fonts so I need to also convert those. Are there any templates or how to's out there

Hi All, I have 2 table and I want to find the gap between them and join them in one table to better comparison and presentation of gaps    Can I do this comparision using FME?  Thank you, Lubna

I have a workspace where I need features from two readers in order to complete a task. The source dataset for one reader will be a single feature class. The source dataset for the second reader will be multiple feature classes (possibly hundreds) and the transformers used are Clipper, AreaOnAreaOverlayer and Dissolver. Is it possible to somehow to easily group the multiple reader sources so as not to have each reader be a single input? Is there an easy way to accomplish this with FME?

I am interested in using parallel processing in a workspace and I understand that the Group By parameter must be uswed. If using a transformer that has two input feature classes such a Clipper or AreaOnAreaOverlayer is it required that the field used, in this case Value, in the Group By parameter be in the attribute table of each feature class? So in order to use parallel processing with the Clipper transformer both the clipper and the clippee would need to have the field Value along with the corresponding attributes to work correctly. Is that correct?

I have for example 100 routes and about 5000 points......these 100 routes are identically until certain points (mean different lengths)...so i want as a result every point with every route with measure extract in an attribute...I#ve done that and the result is right...My Question now is if there is any possibility to have a better calculation performance....now i have for this workbench (screenshot) about 40 mins calculation time. Can i place the transformers in another order or can change some options? Thank you and greetz Franco    

Is there a way to determine which features share a common segment?  The CommonSegmentFinder just routs features as to whether there is a segment in common with any other feature or not. Whereas the SpatialRelator gives all the features that touch the feature.  What I would like is a cross between the two,  the list of related features as in the SpatialRelator, but the relation being shares a segment with

Hi Folks, I am wondering if its possible to reproject a 1.8Gb ecw raster image in datum GDA94 MGA54 Zone 54 to ecw raster in the datum of Popular Visualization CRS [EPSG: 3857]? Will FME handle this size ecw for reprojection? Is anyone able to kindly provide a sample Template to get me started? Any help is appreciated..  Regards, Tony Australia

Hi everybody,  I wrote a shutdown script for logging, now I want to call a XMLFormatter at the end of this tcl script to linearize my output. Is this possible and how? I guess the XMLFormatter would need the Parameters:Formatting Type, XML Input and Output File  Other question, how can I run an other workspace within tcl, so that it also works with the FME Server?  Background: I write a xml file with the aixm writer and want the output (xml file) to be linearized. Therefor I want to use the XMLFormatter.  Thank you, Mel