Skip to main content

- - Community Resources
Ideas
Product Updates
Events
Blog

EN

Home
Search

Recently active posts

340 Posts

takashiContributor

asked in Community Q+A

Where has the Documentation site gone?

The new Community site looks good, but I cannot find the Documentation site.Can you inform me the URL?

jokerfmeContributor

issue - Arcsde Writer (Row Match)

Hello ,I need a help I successfully updated a point geometry in the ArcSDE writer within a specific version. I encountered an issue.When I select "Update Mode" and set "Row selection - Columns " to ObjectID, I get an error translation running . But if I leave "Row seletion - Columns" empty, the translation runs successfully. The "Row selection - Columns " field turns red when left empty, and I’m unable to click "OK." To work around this, I temporarily set "Row Selection - Columns" to ObjectID, click "OK," and then use a Remover transformer before the writer to remove ObjectID—and when I run the workspace ,it works great and translation is successfully . But ’m unclear on how FME identifies the correct point to modify it ,how to resolve my issue ? Update Spatial columns : Should be yes or no ?FME version: 2021, 64-bit.Thanks in advance

0xbox0Contributor

asked in Authoring

Hi,I would like to setup a FeatureReader to read all the XML files in a onedrive folder. My OneDrive (graph) connection works and I’m able to view the contents of my folder. I am able to select individual files to read in the FeatureReader parameters but I want to be able to read all XML files. How would I go about accomplishing this? Thanks in advance.

fme_can_do_itSupporter

asked in Automation

FME Flow 2023.2.2; Where to locate runtime error for the job on FME flow

We have recently upgraded FME flow to the latest 2023.2.2. I am having difficulty locating runtime errors for the job because when you click these runtime errors it will take you to the logs section where you have multiple logs. It's difficult to find which log file has this error. Previous versions directly took you to the error description while this version is not. Please guide me if I am doing anything wrong.Thank you,

Jonathan SlopeContributor

asked in Transformers

Dynamic Writer AGOL

Hi All! Just a hopefully quick question: I want to write data to ArcGIS Online, and i want to do it dynamically, but it isnt really working out, here are my settings: I want to dynamically write data to ArcGIS Online, but i get this error message: Can someone tell what im doing wrong? Thanks in advance!

vlroyrennSupporter

AttibuteManager: Rename attribute "sub-properties" (attr.hyperlink, attr.formatting, etc.) alongside the attribute itselfNew

When using ExcelStyler early on in your flow (I use it to highlight invalid values in Excel fles right after the data has been read from my database) or any transformer that creates <attributename>.something “sub-attributes” (not sure what the actual name would be), you currently must make sure to manually rename all of those alongside the main attribute whenever you rename them through an AttributeManager or AttributeRenamed, otherwise they will not be observed by downstream writers and transformers. If the Styler is added in the later stages of building the flow, that means going through all downstream AttributeManagers one by one to make sure the newly added sub-attributes follow the main one.It would be conveinient if those could all be renamed together automatically whenever the main attribute is renamed.

3

davidleeSupporter

asked in Integration

Using PythonCaller to convert PDF file to image

I want to read PDF files as images using OpenAI's Vision API to extract information. I realized that FME's PDF reader tool has issues with PDFs containing text created by digital signatures—it cannot read them either as text or as images. Therefore, I decided to use PythonCaller to create image files from the PDF files to ensure the data is complete. Below is my code: import pdf2imageimport fmeimport fmeobjectsimport osclass FeatureProcessor: def __init__(self): pass def input(self, feature): pdf_path = feature.getAttribute('path_windows') images = pdf2image.convert_from_path(pdf_path, dpi=300) for index, image in enumerate(images): image_feature = fmeobjects.FMEFeature() image_feature.setAttribute("page_number", index + 1) temp_dir = "D:/temp" if not os.path.exists(temp_dir): os.makedirs(temp_dir) image_name = f"{feature.getAttribute('path_rootname')}_{index + 1}.png"

lorenrouthContributor

Filter Out Purgeable entities in AutoCAD Reader(s)Open

When you read in a CAD file, it reads EVERYTHING, including entities that are not used in the file but still remain. These ‘purgeable’ features can add a significant burden to the Workspace right off the bat. Especially when working with a large number of files, these unpurged entities can crash your Workspace (ask me how I know). It may also be worth it to add some extra handling to prevent errors from killing the process.If we had a checkbox to filter these entities and maybe output to a separate port, this would be a huge boost to efficiency, with the added bonus of a clean file being written out!

3

evieatsafeSafer

Support for BPF (Binary Point File)Open

This is a point cloud format that is often converted to LAS. Format spec: https://nsgreg.nga.mil/doc/view?i=4202

4

martti.vaaliObserver

Using AI for georeferencingOpen

Could it be possible to create a transformer that uses AI image recognition to georeference for example aerial images? AI detects similarities between image and reference imagery and creates reference points that can be used in georeferencing.

3

pbcl1153Participant

GCP TrifferOpen

A trigger for GCP buckets.

2

mark2atsafeSafer

Add a Sampler option to drop unsampled dataOpen

I wondered, maybe Safe could add an option to the Sampler to drop unsampled data, instead of sending it out of the unsampled port.Why?Because when I run a workspace with caching turned on, it’s using up resources caching unsampled data that I don’t need. This is especially true since I was set up to sample only the first feature. Having obtained that single feature, I really don’t need the Sampler to carry on storing other data. In fact, I don’t really need it to carry on processing at all!

24

lambertusEnthusiast

UserParameter values as attribute name

I would like to use 2 UserParameter values as attribute names in my workbench. Is this possibe?Current situation:What I would like to have:

scottsContributor

asked in Automation

Kick off Workspace after fails - FME Flow

I have workspaces that are run from a job submitter in an automation. Is there away to kick off another workspace if it fails? I want to send an SQS message back to our SQS Queue with success or failure messaging. The successful message is easy but I can’t figure out how to send a failure message unless it fails though a specific transformer.

bayramContributor

asked in Community Q+A

How can I place my points on a terrain model

Hello everyone,How can I place my points on a terrain model?I don't have Z values for the points I have, but I have a rester data in Tiff format, how can I place my points on this terrain?

bayramContributor

asked in Community Q+A

Bringing trees at an angle to an upright position

Herkese merhaba3B ağaç verilerim yatay görünüyor, onları nasıl dik konuma getirebilirim? (döndürücü ve 3d döndürücü) Bu iki aracı birçok kez denedim ama işe yaramadı. Bu durumu nasıl çözebilirim?

spalrobertContributor

QGIS python library not able to load

Hi, I am trying to run a custom python code that uses QGIS library in PythonCreator. However when I run the code I get this error:Python Exception <ImportError>: DLL load failed while importing _core: The specified procedure could not be found.I tried everything, I followed the documentation/manual how to setup custom python interpreter, I tried to setup dependencies and environment variables but none of that worked. Can someone tell me what am I doing wrong? Thanks!

marjan_nikoukarContributor

Daily Data update in FME

Hi everyone,I’m working on an FME workbench where I download a full dataset file geodatabase daily. I also have a CSV file that lists daily changes.My goal is to remove files from the main dataset based on the CSV and add updated files from file geodatabase back into the main dataset.I’ve tried using the FeatureMerger and FeatureJoiner transformers to identify changes, but they were not effective due to time constraints. Since this needs to be done daily, time efficiency is crucial.Do you have any suggestions, Python scripts, or SQL queries, or any other ideas to speed up this process?Thank you!

ecthelionContributor

Add precision setting to all transformers that output dimensions or metric coordinatesNew

Add precision setting to all transformers that output dimensions or metric coordinates.To negate the need to add AttributeRounders after (e.g. LengthCalculator) include a precision setting option in the initial transformer.A default setting of 3 (mm) should suffice for most operations.This setting could then be defined as a user parameter for use throughout a workspace. A search shows discussions around precision dating back a decade ago, so I may be late to the party here.

2

fmelizardContributor

asked in FME Hub Alerts

PLATEAU4 品質検査01-2 必須属性等

FME Hub user takashi.pss just uploaded a new template to the FME Hub.Tech PreviewPLATEAU標準製品仕様書第4.x版に基づいて作成されたCityGMLデータについて、拡張製品仕様書において必須とされた主題属性・関連役割、原則として作成対象とされた主題属性・関連役割が記述されているかどうかを object_list.xlsx に基づいて検証し、結果を下記のExcelシートに出力します（問題が検出されなかった場合は、列名だけのシートが出力されます）。必須属性等の欠落 : 個々のフィーチャーについて、必須の主題属性・関連役割（object_listのI列とN列の両方に任意の文字が入力されているもの）のうちデータ内に記述されていないものの名称のリストを出力します。現われなかった属性等 : 必須ではないが作成対象とされている主題属性・関連役割（obect_listのI列に任意の文字が入力されているがN列は空欄であるもの）が検査対象データセットにおいて全く出現しなかった場合に、それらの名称のリストを出力します。注1: object_listのI列、N列には○印を記入することとされていますが、○印にはいくつかの種類（文字コード）があって誤判定の元となるため、このワークスペースでは任意の文字が入力されているかどうかによって対象であるかどうかを判定します。I列、N列には不要な文字を記入しないようにお願いします。注2 : Building または BuildingPart のどちらか一方での記述が必須であるなどの条件付きの必須属性等については、object_listのI列、N列の記述からは条件が判読できないため、正しく判定できない場合があります。注3 : 現時点における検証の対象は、原則として各地物型の直下位の主題属性・関連役割までとしております。関連役割以下の必須属性等の検証については、今後のバージョンアップで追加を検討します。今後も必要に応じて、ワークスペースの機能追加、改良をし、FME Hubを更新することがあります。FME Hubを更新した場合は、Slack PLATEAUコミュニティの「2024技術支援チャンネル」でお知らせしますので、適宜ダウンロードしてお手元の環境も更新してくだ

mccuneeContributor

asked in Integration

FME does not know about coordinate system `EPSG:102003'

Full error;PROJ: proj_create_from_database: crs not foundMicrosoft SQL Server Spatial Reader: Failed to read coordinate system from SQL Server because FME does not know about coordinate system `EPSG:102003'I can use 102003 in the ProjReprojector tool, but, rather than assign _FME_0 as the CRS for this table, it leaves it as unknown, which means the reprojector tool fails, and 102003 doesn’t exist for me to use in the CRSSetter transformers. How do I set the CRS in feature reader when my desired CRS is not in the catalog (note to FME: this is also a request) I tried defining a custom projection here; demos-safe-software.fmecloud.com/fmedatastreaming/Coordsys/Start.fmw?&token=01655ff804fe3b23f29a7b65568c51e81cd09691but this workbench failed in translation / does not create .prj file I can use.

write Paramids when converting to mbtiles

Hi, Is there a way to remove build pyramids when converting geotiff images to mbtile? I just need the image to display and improve mbtiles creation time

bmwhbmwhContributor

asked in Transformers

Hello, my previous post was not well Described apparently, i need to split .las just like that. please if you suggest any workflow do describe it a little more than just the name of transformer as that is usless for me (i dont really know how to use FME)

mmestrovContributor

asked in Community Q+A

Update SDE Layer with Attachments from an AGO HFL

Looking for a workbench that updates an SDE attachment layer from a sync enabled HFL with attachments on AGO. The SDE layer with attachments is not archive enabled.

chriswilsonContributor

Lists - Extract Element RangeNew

Or ‘list slicing’ of course. For example this list with element positions also as values for illustration:List[0,1,2,3,4]A following AttributeManager wants to extract:Attribute1 = List{0} so would retrieve the value of ‘0’Attribute2 = List{1} would retrieve ‘1’Attribute3 = List{2:} or {List{2:5} or List{2:-1} would retrieve ‘2,3,4’Doing this without python would save time and also those without python skills would benefit. I am aware of the ListSlicer and @takashi could correct me if I’m wrong but it doesn’t quite seem to achieve this if the element range is open-ended or goes from e.g. element 2 to the end of the list. Maybe it’s just an enhancement to that transformer?A ListIndexRetriever type transformer might be a good way to do this, or bake it into attribute transformers in addition to the current single-element functionality.

3

1
...
9
10
11
12
13
14

Page 12 / 14

Badge winners

kenortey8has earned the badge Teacher (Grey)
edwardhas earned the badge Integrate Data with the FME Platform Training
kailinatsafehas earned the badge Enchanted by Attributes
gazmanhas earned the badge Welcome Back
miguelhacarhas earned the badge Spanish Speaker

Show all badges

30,351: Posts

Powered by Gainsight

Terms & Conditions Cookie settings

Sign up

Already have an account? Login

An FME Account is required to contribute

Login

Login to the community

An FME Account is required to contribute

Login

Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.

Enter your e-mail address

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

OK

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.

OK

A product of

Company Products Giving Back Careers Contact Privacy Feedback

Safe Software respectfully acknowledges that we live, learn and work on the traditional and unceded territories of the Kwantlen, Katzie, and Semiahmoo First Nations.