+1Hello to all forum members,
I am looking for lines that have a close relationship between each other ~10 [cm].
The result is a blue line.
pictures: a), b), c) it's results from the workflow:
pictures: d), e) found a similar solution only the lines have a real relationship, they intersect.
Transformer: LineOnLineOverlayer and finall LengthCalculator so it's easy to detect.
I tested: NeighborFinder, LineDevider, Snipper, SpatialRelator
Thank you for your help.
Best answer by piotrek6116
Thanks for answer from members,
but the answers do not match my assumption.
I've built a new one workflow 'test' but no exactly what i want.
Input data
Results the workflow 'test' - it's the big red point, that is place when blue line should touch each other around 0.02 cm.
I am looking for a result only green line. Image edited in "paint".
I exclude the relationship on the dots from the example 
+50If I understand you correctly you do want results a, b and c, but not d and e. A SpatialFilter can be used to detect the intersects.
Alternatively, since the AnchoredSnapper changes geometry, you might want to consider using the NeighborFinder instead.
Regarding the NeighborFinder, you may want to consider only using the start/end vertices, you can use the CoordinateExtractor/VertexCreator combination for this.
+1Thanks for answer from members,
but the answers do not match my assumption.
I've built a new one workflow 'test' but no exactly what i want.
Input data
Results the workflow 'test' - it's the big red point, that is place when blue line should touch each other around 0.02 cm.
I am looking for a result only green line. Image edited in "paint".
I exclude the relationship on the dots from the example
+50Thanks for answer from members,
but the answers do not match my assumption.
I've built a new one workflow 'test' but no exactly what i want.
Input data
Results the workflow 'test' - it's the big red point, that is place when blue line should touch each other around 0.02 cm.
I am looking for a result only green line. Image edited in "paint".
I exclude the relationship on the dots from the example
Do give the NeighborFinder a try, from the _closest_candidate_x, _closest_candidate_y, _closest_base_x and _closest_base_y attributes that green line can be reconstructed.
+1Do give the NeighborFinder a try, from the _closest_candidate_x, _closest_candidate_y, _closest_base_x and _closest_base_y attributes that green line can be reconstructed.
Yes that's works. Final results present VertexCreator, thanks for help.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
